- ap/50-van-wan.yaml: revert the comment to "see STARLINK_IFACE in deploy.conf" so the
rendered file is byte-identical to the Pi 5's installed netplan (it otherwise reports
"differs" forever); note in deploy.sh next to render_wan_netplan.
- check 14: baseline 3d117e7, keep byte-identity for wan.conf, assert no /etc/vanlink.conf;
the failure branch no longer aborts the suite under pipefail.
- helper restore(): restart van-br0-setup (unit present, timeout 30, non-fatal) after the
re-apply, before the connectivity re-check; asserted in the rollback sandbox scenario.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KqhjP7nud5gdBg25zCiRk9
nftables.conf hardcoded the R5C network, van-br0-setup.service the R5C
interfaces and several configs wlan0/eth0. All now come from the host
config; the onboard LAN port is skipped when ONBOARD_LAN_IFACE is empty.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
van-failover is now the sole owner of default-route selection: netplan/NM
profiles get ipv4.never-default so NM's own DHCP/lease renewals stop
reinstalling competing default routes (was racing van-failover's enforce_route
on Starlink's 16s lease). set_profile_metric() also pins never-default on
NM-managed connections it doesn't own the netplan source for (e.g. cellular),
and nm_gateway() falls back to the raw DHCP4 lease's `routers` option since NM
stops populating IP4.GATEWAY once never-default is set.
Probing moved from one shared round to independent per-WAN retry scheduling,
so a flaky WAN retries on its own clock instead of dragging healthy WANs into
extra probes or throttling a failing one to the slow steady-state cadence.
config.json: probe_interval 4->60, fail/ok_threshold 3/2->2/1, single probe
URL — verified live across this reboot (cellular took ~2min after NM reported
"activated" to actually pass traffic; van-failover correctly withheld/
deprioritized the default route until then, then installed it automatically).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- deploy.conf templates interface names/USB IDs (@TOKEN@ substitution) across
ap/* configs so a dongle swap only needs deploy.conf edited, not the repo
configs themselves; drops ap/rtw88.conf (old 2.4GHz dongle retired for the
DWA-171, which needs no such power-save override).
- failover/van-wlan-watchdog: recovers wlan0 from NM's post-boot no-secrets
wedge (a boot-time supplicant race, not a real credential failure).
- deploy.sh: warn() collects dependency/config warnings (missing python3-gps,
python3-paho-mqtt, mobile-broadband-provider-info, grpcurl, gpsd; netplan
drift; unedited example configs) into /var/lib/vanlink/deploy-warnings.json,
rendered as an amber Cockpit card so they're visible without reading deploy
output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
With wifi + Starlink + cellular as uplinks, the onboard GbE earns its keep
as a wired LAN port instead of the metric-150 ethernet WAN: eth0 leaves
netplan/NM (added to van-ap-unmanaged.conf) and joins br0 via networkd
(23-van-lan-eth0.network), so wired clients get 10.42.0.x DHCP/DNS and NAT
exactly like Wi-Fi clients. The eth WAN is gone from van-failover's config.
Cutover notes: delete the old netplan-eth0 / stray eth0 NM profiles, then
nmcli general reload + networkctl reload/reconfigure eth0. NEVER cable this
port (or the USB LAN dongle) back into an upstream LAN — dnsmasq on br0
would serve rogue DHCP there; STP stays off, so don't cable both wired LAN
ports to the same switch either.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Starlink RTL8153 gets a declarative NM profile in 50-van-wan.yaml
(replaces the auto 'Wired connection 1') with a 192.168.100.1/32 link route,
so the dish's management address stays reachable from the router and — via
the existing !br0 masquerade — from the van LAN, regardless of which WAN
holds the default route.
New Cockpit "Starlink" card queries the dish's gRPC API (:9200, get_status
via grpcurl — not packaged in apt, deploy.sh warns when missing) inside the
existing single batched spawn: online/obstructed/outage pill, alerts,
uptime, sw version, PoP latency, down/up throughput, obstruction %.
Sentinels distinguish adapter-absent / no-grpcurl / dish-unreachable.
Gotcha captured while cutting over: a WAN profile without ipv4.route-metric
makes NM re-assert its DHCP default (metric ~101) against van-failover's
enforce_route pruning every cycle; the profile metric must match (failover's
set_profile_metric does this on health transitions).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The USB hub (5GHz + 2.4GHz AP dongles, Starlink + LAN RTL8153s) moves over
from wayback; MAC-derived wlx*/enx* names travel with it, so hostapd/
networkd/cockpit configs are unchanged. Pi diffs only: failover WAN list
(wlan0 wifi 100, eth0 150, starlink USB 200, Koodo 300), cpu_thermal
sensor, bcm2835 watchdog 10s, no HA DNAT/lease, and deploy.sh drops
battery/lid/heartbeat/ZT-dns. Netplan reference in ap/50-van-wan.yaml.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
andreasandClaude Opus 5.5
Andreas WredeandClaude Sonnet 5