3 Commits
Author SHA1 Message Date
Andreas WredeandClaude Fable 5 e652b0f7bd ap: parallel 2.4GHz AP (hostapd-2g) on the Linksys WUSB6300v2 dongle
Second radio (wlxd8ec5e2faa8c, RTL8822BU/rtw88), same VanLink SSID+PSK,
ch6 HT20, bridged into br0 next to the 5GHz AP. Runs as its own hostapd
instance + own watchdog so a USB wedge on one radio never darkens the
other; van-ap-watchdog now takes conf path + unit name as args (defaults
unchanged). rtw88.conf disables deep power-save (rtw89 gotcha analog)
and the driver's USB2->3 self-upgrade (USB3 noise in the 2.4GHz band —
note: dongle currently sits in a USB3 port, so it still enumerates
SuperSpeed; move to a USB2 port if 2.4GHz range disappoints).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-06 10:03:16 -04:00
Andreas WredeandClaude Opus 4.8 4117802f69 ap: watchdog checks link ground-truth, not just hostapd state
After a USB re-enumeration the rtw89 radio can come back as a fresh DOWN
netdev, dropped from br0, while the still-running hostapd never notices and
never exits — so Restart=always never fires. hostapd_cli keeps answering
state=ENABLED off stale in-memory state, so the watchdog considered the AP
healthy and left it dark (observed 2026-07-05: AP down ~16:41 until manual
hostapd restart).

Add link_healthy(): require the netdev to be operstate=up and still a port of
its bridge, alongside the existing state=ENABLED check. That catches the wedged
case the control socket can't see.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-05 17:56:12 -04:00
Andreas WredeandClaude Opus 4.8 877fa14d0c ap: keep AP beaconing across USB re-enumeration
Starlink's USB ethernet shares a hub with the rtw89 Wi-Fi adapter; when Starlink
flaps, the hub re-enumerates and tears the radio down, so hostapd loses its
interface and exits. Two stock defaults left the AP dark: Restart=on-failure
misses clean exits, and the 5-in-10s start limit makes systemd give up during a
re-enumeration storm.

- hostapd-restart.conf drop-in: Restart=always, RestartSec=5, StartLimitIntervalSec=0
  so hostapd retries forever until the interface returns (verified: SIGKILL -> back
  to state=ENABLED in ~7s).
- van-ap-watchdog daemon: backstop for the case systemd can't see (hostapd running
  but radio wedged). Polls hostapd_cli status; restarts hostapd if the iface is
  present but not ENABLED, waits it out if the iface is mid-re-enumeration.
- hostapd.conf: add ctrl_interface so the watchdog can read the real AP state.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-01 14:36:14 -04:00