Fixed hostapd-2g.conf to properly specify interface wlx3c3332002066 (D-Link)
for 2.4GHz AP. Both APs now operational:
- 5GHz: wlp1s0 (MT7925E), channel 149, 802.11ac/ax
- 2.4GHz: wlx3c3332002066 (D-Link), channel 6, 802.11n
Both bridged to br0 (10.42.1.0/24), served by dnsmasq DHCP.
D-Link interface usb-modeswitch now working properly (no CDROM mode).
DHCP clients can connect to either band and receive addresses in
the 10.42.1.10-254 range with gateway 10.42.1.1.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
Problem: R5C spontaneously rebooted due to hardware watchdog timeout
Cause 1: van-gps-owntracks in infinite restart loop (MQTT connect failed)
Cause 2: mosquitto only listening on localhost, so clients couldn't connect
Solution:
- Add restart limits to van-gps-owntracks and van-li3-battery services
(max 3 restarts per 5 minutes prevents infinite restart loops)
- Configure mosquitto to listen on all interfaces (0.0.0.0:1883)
- Deploy mosquitto listener config via deploy.sh
- Restart mosquitto during deploy to apply config changes
This prevents the system from hitting the 11-second hardware watchdog timeout
when services crash and systemd auto-restarts them indefinitely.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- deploy.conf templates interface names/USB IDs (@TOKEN@ substitution) across
ap/* configs so a dongle swap only needs deploy.conf edited, not the repo
configs themselves; drops ap/rtw88.conf (old 2.4GHz dongle retired for the
DWA-171, which needs no such power-save override).
- failover/van-wlan-watchdog: recovers wlan0 from NM's post-boot no-secrets
wedge (a boot-time supplicant race, not a real credential failure).
- deploy.sh: warn() collects dependency/config warnings (missing python3-gps,
python3-paho-mqtt, mobile-broadband-provider-info, grpcurl, gpsd; netplan
drift; unedited example configs) into /var/lib/vanlink/deploy-warnings.json,
rendered as an amber Cockpit card so they're visible without reading deploy
output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Second radio (wlxd8ec5e2faa8c, RTL8822BU/rtw88), same VanLink SSID+PSK,
ch6 HT20, bridged into br0 next to the 5GHz AP. Runs as its own hostapd
instance + own watchdog so a USB wedge on one radio never darkens the
other; van-ap-watchdog now takes conf path + unit name as args (defaults
unchanged). rtw88.conf disables deep power-save (rtw89 gotcha analog)
and the driver's USB2->3 self-upgrade (USB3 noise in the 2.4GHz band —
note: dongle currently sits in a USB3 port, so it still enumerates
SuperSpeed; move to a USB2 port if 2.4GHz range disappoints).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
andreas
Andreas WredeandClaude Sonnet 5