STARLINK_IFACE pointed at the wrong device after the USB hub swap (was
accidentally set to the 5GHz AP dongle's interface). failover/config.json
also hardcoded the old interface name instead of being templated like the
other configs, so deploy.conf changes never reached it — switched it to
@STARLINK_IFACE@ and deploy.sh now renders it.
- deploy.conf: DNS_RESOLVERS, always 1.1.1.1/8.8.8.8, never a WAN's own
DHCP/RA-provided servers (previously whatever Wapana handed out).
- ap/99-van-router-dns.conf: global resolved config (fixed DNS, Domains=~.,
global MulticastDNS=yes — a prerequisite for any per-link mDNS to work at
all, not just an on/off toggle).
- failover/60-van-wan-dns: NM dispatcher that strips each WAN's DNS/search-
domain and disables its mDNS via resolvectl on every connect/lease event
(NM's own ipv4/ipv6.ignore-auto-dns can't be set as a config-file default —
confirmed rejected as an unknown key — so this enforces it directly
instead), retried over ~5s to beat NM's own async DNS commit. Also logs
what each WAN advertised, never used, to /run/van-wan-dns/.
- ap/21-van-br0.network: MulticastDNS=yes, scoped to the van's own LAN only
— .local/mDNS now resolves for ESPHome and other LAN devices without
leaking mDNS onto Wapana/Starlink/cellular.
- dns/: ZeroTier-managed DNS (zt.wrede.pvt) made reproducible — installed
the official zerotier-systemd-manager package (verified against upstream
checksums), additive to the above so *.zt.wrede.pvt keeps resolving over
the overlay independent of WAN.
- ha/esphome.container: ESPHome dashboard as a sibling Podman Quadlet to
Home Assistant, same host-network/config-volume pattern.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- deploy.conf templates interface names/USB IDs (@TOKEN@ substitution) across
ap/* configs so a dongle swap only needs deploy.conf edited, not the repo
configs themselves; drops ap/rtw88.conf (old 2.4GHz dongle retired for the
DWA-171, which needs no such power-save override).
- failover/van-wlan-watchdog: recovers wlan0 from NM's post-boot no-secrets
wedge (a boot-time supplicant race, not a real credential failure).
- deploy.sh: warn() collects dependency/config warnings (missing python3-gps,
python3-paho-mqtt, mobile-broadband-provider-info, grpcurl, gpsd; netplan
drift; unedited example configs) into /var/lib/vanlink/deploy-warnings.json,
rendered as an amber Cockpit card so they're visible without reading deploy
output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
NM reports a gsm connection's device as the control port (cdc-wdm0), but
IP + routes live on the wwan netdev (wwu1u2i4 on the Quectel EC25-AF), so
probes and route enforcement silently saw nothing (cellular stuck "down",
no metric). Map connection-keyed WANs through GENERAL.IP-IFACE, and let
the gateway fallback query the connection since the netdev isn't an NM
device.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With wifi + Starlink + cellular as uplinks, the onboard GbE earns its keep
as a wired LAN port instead of the metric-150 ethernet WAN: eth0 leaves
netplan/NM (added to van-ap-unmanaged.conf) and joins br0 via networkd
(23-van-lan-eth0.network), so wired clients get 10.42.0.x DHCP/DNS and NAT
exactly like Wi-Fi clients. The eth WAN is gone from van-failover's config.
Cutover notes: delete the old netplan-eth0 / stray eth0 NM profiles, then
nmcli general reload + networkctl reload/reconfigure eth0. NEVER cable this
port (or the USB LAN dongle) back into an upstream LAN — dnsmasq on br0
would serve rogue DHCP there; STP stays off, so don't cable both wired LAN
ports to the same switch either.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The USB hub (5GHz + 2.4GHz AP dongles, Starlink + LAN RTL8153s) moves over
from wayback; MAC-derived wlx*/enx* names travel with it, so hostapd/
networkd/cockpit configs are unchanged. Pi diffs only: failover WAN list
(wlan0 wifi 100, eth0 150, starlink USB 200, Koodo 300), cpu_thermal
sensor, bcm2835 watchdog 10s, no HA DNAT/lease, and deploy.sh drops
battery/lid/heartbeat/ZT-dns. Netplan reference in ap/50-van-wan.yaml.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Andreas Wrede
