Hosts on the van LAN were all NATed to the router's ZT address when
reaching ZeroTier peers, hiding real source IPs from logs and
source-based firewall rules. Exclude ztuga7c2kh alongside br0.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
nftables.conf hardcoded the R5C network, van-br0-setup.service the R5C
interfaces and several configs wlan0/eth0. All now come from the host
config; the onboard LAN port is skipped when ONBOARD_LAN_IFACE is empty.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Fixed two issues in nftables.conf:
1. Unsubstituted placeholder @GATEWAY_NETWORK@ - hardcoded to 10.42.1.0/24
2. Missing semicolon on masquerade rule
NAT now working - clients can access internet through R5C gateway.
Masquerade rule: traffic from 10.42.1.0/24 not destined for br0 is NATed
to the outgoing interface (Starlink/Ethernet uplink).
Verified:
- R5C gateway: 10.42.1.1/24
- Dual-band WiFi: 5GHz (ch 149) + 2.4GHz (ch 6)
- DHCP: 3+ active leases
- Internet: R5C can ping 1.1.1.1, clients ready for internet access
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
Add GATEWAY_IP, GATEWAY_PREFIX, GATEWAY_NETWORK, DHCP_RANGE_START, and
DHCP_RANGE_END variables to deploy.conf. Update ap/21-van-br0.network,
ap/van-ap-dnsmasq.conf, and ap/nftables.conf to use @TOKEN@ placeholders
for IP configuration instead of hardcoding 10.42.x addresses.
This allows deploying the same configuration to multiple routers on
different networks (e.g., Pi 5 on 10.42.0.x and R5C on 10.42.1.x) by
simply editing deploy.conf before running ./deploy.sh.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
The fixed 2 GiB ha_van allocation starved the 4 GB Pi. HA Container now
runs on the host network (http://10.42.0.1:8123): ha/homeassistant.container
installs to /etc/containers/systemd/, config in /srv/homeassistant, host
D-Bus mounted for onboard Bluetooth (needs apparmor=unconfined — Ubuntu's
dbus-daemon mediates per AppArmor label and denies AddMatch to BlueZ —
plus NET_ADMIN/NET_RAW for habluetooth adapter recovery).
Drop the VM-era plumbing: the 10.42.0.50 dhcp-host pin becomes a
host-record for 10.42.0.1, and the legacy-URL DNAT + hairpin masquerade
go away entirely. ha_van.xml retired to git history.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The x86 ha_van stayed behind on wayback at the port (9bf1420 dropped
ha/ and its DNAT/lease); with the hub moved and the Pi owning
10.42.0.0/24, HA follows. New domain XML: machine=virt + AAVMF EFI,
virtio-scsi HAOS 18.1 aarch64 image, 2 GiB (data restored from an HA
full backup — the x86 qcow2 can't cross architectures). Same MAC, so
the dnsmasq pin (10.42.0.50 / "homeassistant") and the legacy
10.42.0.1:8123 DNAT + br0 hairpin port back verbatim.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The USB hub (5GHz + 2.4GHz AP dongles, Starlink + LAN RTL8153s) moves over
from wayback; MAC-derived wlx*/enx* names travel with it, so hostapd/
networkd/cockpit configs are unchanged. Pi diffs only: failover WAN list
(wlan0 wifi 100, eth0 150, starlink USB 200, Koodo 300), cpu_thermal
sensor, bcm2835 watchdog 10s, no HA DNAT/lease, and deploy.sh drops
battery/lid/heartbeat/ZT-dns. Netplan reference in ap/50-van-wan.yaml.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The VM lived on libvirt's default NAT net (192.168.122.50) behind a
/etc/libvirt/hooks/network hook that inserted FORWARD accepts above
libvirt's REJECT. libvirtd restarts re-inserted its chains on top
without firing the hook, silently cutting clients off from HA.
Now the VM's NIC (virtio, was e1000) bridges into br0: pinned lease
10.42.0.50 / name 'homeassistant' via van-ap dnsmasq, mDNS discovery
works, and no firewall hook can rot. Legacy http://10.42.0.1:8123
kept working via DNAT + same-subnet hairpin masquerade. Hook, libvirt
DHCP reservation, and iptables rules removed; domain XML in ha/.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add a wired LAN port on the same 10.42.0.0/24 segment as VanLink WiFi by
bridging both into br0. The gateway IP, dnsmasq, and NAT move off the wlan name
onto br0; hostapd (not networkd) enslaves the wlan via bridge=br0, since a
station-mode wlan can't be bridged until it's in AP mode. NM leaves the wired
port unmanaged so networkd owns it. Failover/Starlink (enxd8ec5eeb3512)
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
andreasandClaude Sonnet 5.5
Andreas WredeandClaude Fable 5