# deploy.conf — hardware-instance identifiers for this Pi's vanlink deployment.
#
# These are the values that change when a USB Wi-Fi dongle, LAN adapter, or
# modem gets physically swapped (MAC-derived interface names are stable per
# physical device, but change when the device changes). Edit here and run
# `sudo ./deploy.sh` — it substitutes @TOKEN@ placeholders in the repo's
# config templates with these values before installing them.
#
# Find a new device's interface name after plugging it in: `iw dev` (wifi) or
# `ip -br link` (wired). USB vendor ID: `lsusb`.
# Preview a rendered file without deploying: `sudo ./deploy.sh render <file>`

SKIP_COCKPIT=1

# 5GHz AP radio (currently: Realtek RTL8822CE built-in on FriendlyElec R5C, driver rtl88x2ce)
WIFI_5G_IFACE=wlan1

# 2.4GHz AP radio (currently: D-Link DWA-171, RTL8821CU, driver rtl8821cu)
WIFI_2G_IFACE=wlan2

# Wired LAN port, USB-attached gigabit adapter (RTL8153-family)
LAN_USB_IFACE=eth0

# Starlink dish uplink, USB-attached gigabit adapter (RTL8153-family)
#STARLINK_IFACE=enxd8ec5eeb3512	# White Belkin dongle
#STARLINK_IFACE=enx6c1ff7d210a5  # UGreen 8-port hub's built-in Ethernet (ASIX AX88179B)
STARLINK_IFACE=eth1 

# Cellular modem USB vendor ID (Quectel EC25-AF)
MODEM_USB_VENDOR=2c7c

# Fixed upstream DNS resolvers — this router always uses these, never a WAN's
# own DHCP/RA-provided servers (NetworkManager is told to ignore those
# entirely; see ap/van-wan-dns.conf + ap/99-van-router-dns.conf). Keeps
# resolution identical on Wapana, Starlink, or cellular.
DNS_RESOLVERS="1.1.1.1 8.8.8.8"

# IP address configuration for this router
# When deploying to different hardware, change GATEWAY_IP, DHCP_RANGE_START/END, and GATEWAY_NETWORK.
# Pi 5 (main): 10.42.0.1/24 with DHCP 10.42.0.10-254
# R5C (failover): 10.42.1.1/24 with DHCP 10.42.1.10-254
GATEWAY_IP="10.42.1.1"
GATEWAY_PREFIX="24"
GATEWAY_NETWORK="10.42.1.0/24"
DHCP_RANGE_START="10.42.1.10"
DHCP_RANGE_END="10.42.1.254"