# hosts/wan.conf — Raspberry Pi 5, hostname "wan".
# /etc/vanlink.conf -> this file. See hosts/vanlink.conf.example for the variable list.

WIFI_5G_IFACE=wlxc83a35a4ee55   # Realtek RTL8852BU, rtw89
WIFI_2G_IFACE=wlxf4f26d1760a7   # D-Link DWA-171, RTL8821CU
LAN_IFACE=enx00e04c331140
STARLINK_IFACE=enx3c8cf861752b  # TrendNet USB dongle
WIFI_WAN_IFACE=wlan0
ONBOARD_LAN_IFACE=eth0

GATEWAY_IP="10.42.0.1"
GATEWAY_PREFIX="24"
GATEWAY_NETWORK="10.42.0.0/24"
DHCP_RANGE_START="10.42.0.10"
DHCP_RANGE_END="10.42.0.254"
DNS_RESOLVERS="1.1.1.1 8.8.8.8"

MODEM_USB_VENDOR=2c7c

AP_SSID_5G=VanLink
AP_SSID_2G=VanLink
# RTL8852BU: 80MHz VHT/HE on ch 149 (centre 155)
AP_5G_RADIO='ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40]\nvht_oper_chwidth=1\nvht_oper_centr_freq_seg0_idx=155\nvht_capab=[RXLDPC][SHORT-GI-80][SU-BEAMFORMEE]\nhe_oper_chwidth=1\nhe_oper_centr_freq_seg0_idx=155\nieee80211h=0'
NVME_DEVICE=
NVME_FS_DEVICE=

USB_BACKUP_ROOT_PART=/dev/sda2
USB_BACKUP_MOUNT=10.42.0.44:/media/andreas/writable-nvme
SD_BACKUP_UUID=

ENABLE_COCKPIT=0
ENABLE_LI3=0
ENABLE_NVME_WATCH=0             # boots from mmcblk0; no NVMe fitted
ENABLE_HA=1
ENABLE_FRIGATE=0
ENABLE_NM_WAN=1
ENABLE_LEDS=0                   # Pi 5: its LEDs are left alone

LED_POWER=
LED_LAN=
LED_WAN=
LED_WLAN=

CELLULAR_CONN_NAME=Koodo
CELLULAR_APN=sp.koodo.com