# hosts/van.conf — FriendlyElec NanoPi R5C, hostname "van" (Armbian).
# /etc/vanlink.conf -> this file. See hosts/vanlink.conf.example for the variable list.

WIFI_5G_IFACE=wlp1s0            # MediaTek MT7925E (PCIe); 2.4GHz AP is the separate USB dongle below
WIFI_2G_IFACE=wlx3c3332002066   # D-Link USB dongle
LAN_IFACE=enP1p17s0
STARLINK_IFACE=enP2p33s0
WIFI_WAN_IFACE=                 # none: no spare radio (the R5C's two radios are both APs)
ONBOARD_LAN_IFACE=

GATEWAY_IP="10.42.1.1"
GATEWAY_PREFIX="24"
GATEWAY_NETWORK="10.42.1.0/24"
DHCP_RANGE_START="10.42.1.10"
DHCP_RANGE_END="10.42.1.254"
DNS_RESOLVERS="1.1.1.1 8.8.8.8"

MODEM_USB_VENDOR=2c7c

AP_SSID_5G=VanLink2
AP_SSID_2G=VanLink2-2G
# MT7925E: no 80MHz width lines, no ieee80211h
AP_5G_RADIO='ht_capab=[HT20][SHORT-GI-20][HT40+][HT40-]\nvht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][SU-BEAMFORMEE]\nhe_su_beamformee=1\nhe_mu_edca_qos_info_param_count=0'
NVME_DEVICE=
NVME_FS_DEVICE=

USB_BACKUP_ROOT_PART=
USB_BACKUP_MOUNT=
SD_BACKUP_UUID=39118305-4927-47a4-acc7-ba022f37af22

ENABLE_COCKPIT=0
ENABLE_LI3=1
ENABLE_NVME_WATCH=0             # no NVMe on this board
ENABLE_HA=1
ENABLE_FRIGATE=1
ENABLE_NM_WAN=1

CELLULAR_CONN_NAME=Koodo
CELLULAR_APN=sp.koodo.com