interface=@WIFI_5G_IFACE@
# Put the AP into br0 so Wi-Fi and the wired LAN port share one 10.42.1.0/24 segment.
# hostapd adds the wlan to the bridge after setting AP mode; the bridge itself + its
# wired member + the gateway IP are defined under /etc/systemd/network (2x-van-br0/lan).
bridge=br0
# Control socket so van-ap-watchdog (and hostapd_cli) can read the AP's real state
# (state=ENABLED means it's actually beaconing) — used to detect a wedged radio that
# stays "running" but stops serving after a USB glitch.
ctrl_interface=/var/run/hostapd
driver=nl80211
ssid=VanLink2
country_code=CA
ieee80211d=1
hw_mode=g
channel=6
wmm_enabled=1
# 2.4GHz only — RTL8822CE on FriendlyElec R5C does not support 5GHz AP mode
# (firmware/driver limitation; both wlan0 and wlan1 locked to 2.4GHz)
ieee80211n=1
ht_capab=[HT20][SHORT-GI-20]
auth_algs=1
wpa=2
wpa_passphrase=1foot11foot11
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP