andreasandClaude Sonnet 5
4f62b9f770
Live R5C run: after the Armbian catch-all .network was removed, networkd kept its in-memory claim on the uplink port (two addresses, extra proto dhcp default route) until `networkctl reload`. The helper now reloads networkd after the forward apply and after the rollback re-apply (not fatal, not gating; logs the port state and a "networkd still manages" note on the forward path), the AN_* time budget includes it, and --post-check warns when the netplan matches but networkd still lists the uplink port configured/configuring. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KqhjP7nud5gdBg25zCiRk9
1250 lines
69 KiB
Bash
Executable File
1250 lines
69 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Deploy vanlink configs/scripts to their system locations. One checkout is
|
|
# shared by every host; host-specific values come from /etc/vanlink.conf
|
|
# (symlink to hosts/<hostname>.conf — see hosts/vanlink.conf.example).
|
|
# Usage: cd ~/vanlink && sudo ./deploy.sh
|
|
# ./deploy.sh --check [conf] # validate conf + render all templates, no install
|
|
# ./deploy.sh --diff [conf] # what would change in /etc
|
|
# ./deploy.sh --post-check [conf] # read-only live checks (units, br0, LAN, NAT, dnsmasq, radios, uplink); exit 1 on any warning
|
|
# # POSTCHECK_WAIT=<s>: seconds retried probes may wait in total (default 15; 0 = single attempt)
|
|
# ./deploy.sh --classify-unit <ActiveState> <Result> <ExecMainStatus> # prints ok|finished|wait|warn (used by post_check; for tests)
|
|
# ./deploy.sh --classify-radio # reads `iw dev <if> info` text on stdin, prints beaconing|silent (no ssid line = silent; used by post_check; for tests)
|
|
# ./deploy.sh --render-wan-netplan # rendered /etc/netplan/50-van-wan.yaml (ethernet part + wifis stanza when WIFI_WAN_IFACE is set)
|
|
# ./deploy.sh --wan-plan [conf] # what the NetworkManager WAN provisioning would do (read-only, no root)
|
|
# ./deploy.sh --apply-network [--force] # root: a detached helper installs the WAN netplan, applies it, gates on uplink health (2 stages) and rolls back
|
|
# # automatically on failure; status in /var/lib/vanlink/apply-network.status. No-op when already applied, and refused after a
|
|
# # running/rollback-failed status, unless --force.
|
|
# # Refused (unless --force) when the preflight finds a problem, or when an existing
|
|
# # /etc/netplan/50-van-wan.yaml differs from the rendered one (the diff is shown, secrets redacted).
|
|
# ./deploy.sh --apply-preflight [conf] # problems --apply-network would refuse on, one per line (none: no output, exit 0):
|
|
# # STARLINK_IFACE absent in sysfs; /etc/vanlink.conf -> hosts/<name>.conf with <name> != `hostname -s`
|
|
# ./deploy.sh --apply-status-check <file> # test seam: yes|no, would this status file (running|rollback-failed) block --apply-network
|
|
# ./deploy.sh --print-apply-helper [conf] # print the detached apply/rollback helper script (read-only, no root; for review and tests)
|
|
# # test-only flags: --backup --netplan-dir --log --status --sysnet --rendered --nm-conf-dir --deadlines "s1 s2 rc" --stamp
|
|
# ./deploy.sh render <file> # preview a templated file on stdout
|
|
# ./deploy.sh --redact # filter stdin, masking secret values (used by --diff; for tests)
|
|
# VANLINK_CONF=<file> # host config path (default /etc/vanlink.conf); sub-commands taking [conf] use that argument instead
|
|
# VANLINK_SYSNET=<dir> # test override: sysfs net dir used by --post-check and --apply-preflight (default /sys/class/net)
|
|
# VANLINK_HOSTNAME=<name> # test override: host name used by --apply-preflight (default `hostname -s`; ignored when run as root)
|
|
# VANLINK_FAILOVER_STATE=<file> # test override: van-failover state file read by --post-check (default /run/van-failover/state.json)
|
|
# VANLINK_APPLY_STATUS=<file> # test override: apply-network status file read by --post-check (default /var/lib/vanlink/apply-network.status)
|
|
# VANLINK_WAN_NETPLAN=<file> # test override: installed WAN netplan compared by nm_wan_state_netplan (default /etc/netplan/50-van-wan.yaml)
|
|
# VANLINK_NM_DIR=<dir> # test override: where existing NM *.nmconnection files are looked up (default /etc/NetworkManager/system-connections;
|
|
# # ignored when run as root)
|
|
# Idempotent. Netplan (the NM-managed WANs; eth0 is a LAN port on br0) is never
|
|
# changed by a routine deploy (applying it flaps the uplinks). ENABLE_NM_WAN=0:
|
|
# applied manually from the reference copy in ap/50-van-wan.yaml, and checked for
|
|
# drift below. ENABLE_NM_WAN=1: a missing/differing WAN netplan is only warned
|
|
# about; it is applied by `./deploy.sh --apply-network` alone.
|
|
set -euo pipefail
|
|
cd "$(dirname "$(readlink -f "$0")")"
|
|
|
|
# Host-specific values (interface names, addressing, feature flags) live in
|
|
# /etc/vanlink.conf — a symlink to hosts/<hostname>.conf in this repo. Config
|
|
# files below carry @TOKEN@ placeholders substituted from those variables via
|
|
# render()/install_rendered() — edit hosts/<hostname>.conf, not the configs.
|
|
VANLINK_CONF=${VANLINK_CONF:-/etc/vanlink.conf}
|
|
|
|
# Must be defined (non-empty) in the host file; deploy aborts naming any missing.
|
|
REQUIRED_VARS=(
|
|
WIFI_5G_IFACE WIFI_2G_IFACE LAN_IFACE STARLINK_IFACE
|
|
GATEWAY_IP GATEWAY_PREFIX GATEWAY_NETWORK DHCP_RANGE_START DHCP_RANGE_END
|
|
DNS_RESOLVERS MODEM_USB_VENDOR AP_SSID_5G AP_SSID_2G AP_5G_RADIO
|
|
ENABLE_COCKPIT ENABLE_LI3 ENABLE_NVME_WATCH ENABLE_HA ENABLE_FRIGATE
|
|
ENABLE_NM_WAN
|
|
)
|
|
# May be empty or absent; NVME_* are required only when ENABLE_NVME_WATCH=1.
|
|
OPTIONAL_VARS=(
|
|
WIFI_WAN_IFACE CELLULAR_CONN_NAME CELLULAR_APN
|
|
ONBOARD_LAN_IFACE NVME_DEVICE NVME_FS_DEVICE
|
|
USB_BACKUP_ROOT_PART USB_BACKUP_MOUNT SD_BACKUP_UUID
|
|
)
|
|
# Computed in load_conf; usable as @TOKEN@ like the rest.
|
|
DERIVED_VARS=(ONBOARD_LAN_UNMANAGED CELLULAR_UUID)
|
|
TOKEN_VARS=("${REQUIRED_VARS[@]}" "${OPTIONAL_VARS[@]}" "${DERIVED_VARS[@]}")
|
|
TOKEN_RE='@[A-Z][A-Z0-9_]*@'
|
|
|
|
die() { echo "deploy: $*" >&2; exit 1; }
|
|
|
|
load_conf() { # load_conf <file> — source and validate a host config
|
|
local f=$1 v flag missing=()
|
|
[ -e "$f" ] || die "$f not found (missing or dangling symlink). Create it for this host with:
|
|
sudo ln -sfn \"$PWD/hosts/$(hostname -s).conf\" /etc/vanlink.conf"
|
|
for v in "${TOKEN_VARS[@]}"; do unset "$v"; done
|
|
# shellcheck disable=SC1090
|
|
. "$f"
|
|
for v in "${REQUIRED_VARS[@]}"; do
|
|
[ -n "${!v:-}" ] || missing+=("$v")
|
|
done
|
|
[ ${#missing[@]} -eq 0 ] || die "$f is missing required variable(s): ${missing[*]}"
|
|
for flag in ENABLE_COCKPIT ENABLE_LI3 ENABLE_NVME_WATCH ENABLE_HA ENABLE_FRIGATE ENABLE_NM_WAN; do
|
|
case ${!flag} in
|
|
0|1) ;;
|
|
*) die "$f: $flag must be 0 or 1 (got '${!flag}')" ;;
|
|
esac
|
|
done
|
|
[[ $STARLINK_IFACE =~ ^[A-Za-z0-9._-]+$ ]] || die "$f: STARLINK_IFACE '$STARLINK_IFACE' has characters outside [A-Za-z0-9._-]"
|
|
if [ "$ENABLE_NVME_WATCH" = 1 ]; then
|
|
{ [ -n "${NVME_DEVICE:-}" ] && [ -n "${NVME_FS_DEVICE:-}" ]; } \
|
|
|| die "$f: ENABLE_NVME_WATCH=1 needs NVME_DEVICE and NVME_FS_DEVICE"
|
|
fi
|
|
ONBOARD_LAN_UNMANAGED=${ONBOARD_LAN_IFACE:+;interface-name:$ONBOARD_LAN_IFACE}
|
|
# Stable per connection name; pure bash + sha1sum (coreutils), no uuid-runtime dependency.
|
|
local h
|
|
h=$(printf 'vanlink-%s' "${CELLULAR_CONN_NAME:-}" | sha1sum | cut -c1-32)
|
|
CELLULAR_UUID="${h:0:8}-${h:8:4}-5${h:13:3}-8${h:17:3}-${h:20:12}"
|
|
}
|
|
|
|
render() { # render <file> -> stdout, with @TOKEN@ placeholders substituted
|
|
local args=() v
|
|
for v in "${TOKEN_VARS[@]}"; do
|
|
args+=(-e "s|@${v}@|${!v-}|g")
|
|
done
|
|
sed "${args[@]}" "$1"
|
|
}
|
|
|
|
# The netplan is two templates: ap/50-van-wan.yaml (ethernet/Starlink) and
|
|
# ap/50-van-wan-wifi.yaml (the wifis: stanza, appended verbatim only for hosts
|
|
# with a Wi-Fi uplink, so a host without one gets no empty/invalid wifis: block).
|
|
# The rendered netplan must stay byte-identical to what live hosts have installed (comments included:
|
|
# nm_wan_state_netplan compares bytes, and "differs" invites an --apply-network that flaps the uplinks).
|
|
# Do not edit comments in ap/50-van-wan*.yaml without re-checking `--wan-plan` on every host.
|
|
render_wan_netplan() { # ap/50-van-wan.yaml, plus the wifis stanza when the host has a Wi-Fi uplink
|
|
render ap/50-van-wan.yaml
|
|
if [ -n "${WIFI_WAN_IFACE:-}" ]; then
|
|
render ap/50-van-wan-wifi.yaml
|
|
fi
|
|
}
|
|
|
|
nm_wan_state_netplan() { # missing | unreadable | differs | matches (the installed WAN netplan vs the rendered one)
|
|
local f=${VANLINK_WAN_NETPLAN:-/etc/netplan/50-van-wan.yaml}
|
|
if [ ! -f "$f" ]; then echo missing
|
|
elif [ ! -r "$f" ]; then echo unreadable # installed 0600 by --apply-network; only root can compare it
|
|
elif diff -q <(render_wan_netplan) "$f" >/dev/null 2>&1; then echo matches
|
|
else echo differs; fi
|
|
}
|
|
|
|
nm_pkg_installed() { # true if the network-manager package is installed (dpkg's Status, not just known to dpkg)
|
|
local s
|
|
s=$(dpkg-query -W -f='${Status}' network-manager 2>/dev/null) || return 1
|
|
[ "$s" = "install ok installed" ]
|
|
}
|
|
|
|
# Keeps NetworkManager off the uplink port until --apply-network hands it over (ap/nm-uplink-pending.conf).
|
|
NM_PENDING_CONF=/etc/NetworkManager/conf.d/zz-van-wan-pending.conf
|
|
# nm_pending_action <netplan-state> <pending-conf> -> would install | installed | would remove | absent
|
|
# The routine deploy installs the pending conf only while the WAN netplan is missing (the uplink was never
|
|
# handed to NM) and removes it once it matches. differs/unreadable: the port was already handed to NM by an
|
|
# earlier netplan, so the file is left as it is (installing it would take a live uplink away from NM).
|
|
nm_pending_action() {
|
|
case "$1" in
|
|
missing) if [ -e "$2" ]; then echo installed; else echo "would install"; fi ;;
|
|
matches) if [ -e "$2" ]; then echo "would remove"; else echo absent; fi ;;
|
|
*) if [ -e "$2" ]; then echo installed; else echo absent; fi ;;
|
|
esac
|
|
}
|
|
|
|
cellular_profile_exists() { # true if an NM profile with id=$CELLULAR_CONN_NAME exists (any file name, or known to nmcli)
|
|
local d=/etc/NetworkManager/system-connections f names
|
|
[ "$(id -u)" = 0 ] || d=${VANLINK_NM_DIR:-$d} # the test knob is ignored when run as root
|
|
for f in "$d"/*.nmconnection; do
|
|
[ -f "$f" ] || continue
|
|
if grep -Fx "id=${CELLULAR_CONN_NAME}" "$f" >/dev/null 2>&1; then return 0; fi
|
|
done
|
|
if command -v nmcli >/dev/null 2>&1; then
|
|
names=$(nmcli -g NAME connection show 2>/dev/null) || names=
|
|
if printf '%s\n' "$names" | grep -Fx "${CELLULAR_CONN_NAME}" >/dev/null 2>&1; then return 0; fi
|
|
fi
|
|
return 1
|
|
}
|
|
|
|
check_rendered() { # check_rendered <src> <rendered-file> — fail on a leftover @TOKEN@
|
|
local left
|
|
left=$(grep -oE "$TOKEN_RE" "$2" | sort -u | tr '\n' ' ') || true
|
|
[ -z "$left" ] && return 0
|
|
echo "deploy: $1: unrendered token(s) after render: $left" >&2
|
|
return 1
|
|
}
|
|
|
|
install_rendered() { # install_rendered <src> <dst> [mode]
|
|
local tmp
|
|
tmp=$(mktemp)
|
|
render "$1" > "$tmp"
|
|
check_rendered "$1" "$tmp" || { rm -f "$tmp"; exit 1; }
|
|
install -D -m"${3:-0644}" "$tmp" "$2"
|
|
rm -f "$tmp"
|
|
}
|
|
|
|
redact_secrets() { # stdin -> stdout; mask values of secret-looking keys, keep key + diff markers
|
|
sed -E \
|
|
-e 's/((pass(word|phrase)|secret|token)[A-Za-z_]*[[:space:]]*=).*/\1<redacted>/I' \
|
|
-e 's/("[A-Za-z_]*(pass(word|phrase)|secret|token|user)[A-Za-z_]*"[[:space:]]*:[[:space:]]*)"[^"]*"/\1"<redacted>"/I' \
|
|
-e 's/^([-+ ]?[[:space:]]*(pass(word|phrase)|secret|token)[A-Za-z_]*:[[:space:]]*)[^[:space:]].*/\1<redacted>/I'
|
|
}
|
|
|
|
# apply_preflight_problems <conf> <sysnet-dir> <hostname> — one line per reason --apply-network should not run
|
|
# here (nothing when fine): the uplink port does not exist, or the conf is a hosts/<name>.conf of another host
|
|
# (checked only when the conf resolves into a hosts/ directory).
|
|
apply_preflight_problems() {
|
|
local conf=$1 sn=$2 hn=$3 real
|
|
[ -e "$sn/$STARLINK_IFACE" ] || echo "uplink port STARLINK_IFACE=$STARLINK_IFACE does not exist ($sn/$STARLINK_IFACE)"
|
|
real=$(readlink -f "$conf")
|
|
if [ "$(basename "$(dirname "$real")")" = hosts ] && [ "$(basename "$real" .conf)" != "$hn" ]; then
|
|
echo "$conf -> $real is not this host's config (hostname $hn)"
|
|
fi
|
|
}
|
|
|
|
template_files() { # every repo file that carries an @TOKEN@ placeholder
|
|
grep -rlE "$TOKEN_RE" --exclude-dir=.git --exclude-dir=__pycache__ --exclude-dir=.superpowers \
|
|
--exclude-dir=docs --exclude-dir=tests --exclude-dir=hosts \
|
|
--exclude='*.bak' --exclude='*.md' --exclude=deploy.sh . | sed 's|^\./||' | sort
|
|
}
|
|
|
|
# Collected during a deploy and persisted to WARNINGS_FILE so the Cockpit vanrouter page
|
|
# can surface deploy-time issues (missing deps, unedited example configs, drift)
|
|
# without someone having to remember to scroll back through deploy output.
|
|
WARNINGS=()
|
|
WARNINGS_FILE=/var/lib/vanlink/deploy-warnings.json
|
|
warn() { # warn <message...> — prints " -> <message>" (as before) and records it
|
|
echo " -> $*"
|
|
WARNINGS+=("$*")
|
|
}
|
|
|
|
# The units a deploy enables (and post_check expects active). Needs the host
|
|
# config loaded. The `if` guards sit in column 0 on purpose: tests/check-templates.sh
|
|
# check 6 requires flag-gated unit names to appear only inside such guards.
|
|
set_units() {
|
|
ENABLE_UNITS=(regdomain.service van-br0-setup.service hostapd hostapd-2g van-ap-dnsmasq nftables systemd-networkd van-failover van-thermal van-ap-watchdog van-ap-watchdog-2g van-wlan-watchdog van-modem-watch van-sms-watch van-gps-owntracks van-router-mqtt)
|
|
EXTRA_CHECK_UNITS=() # started by deploy but not in the `enable` list
|
|
if [ "$ENABLE_NVME_WATCH" = 1 ]; then
|
|
ENABLE_UNITS+=(van-nvme-watch)
|
|
fi
|
|
if [ "$ENABLE_LI3" = 1 ]; then
|
|
ENABLE_UNITS+=(van-li3-battery)
|
|
fi
|
|
if [ "$ENABLE_NM_WAN" = 1 ]; then
|
|
ENABLE_UNITS+=(NetworkManager ModemManager)
|
|
fi
|
|
if [ "$ENABLE_HA" = 1 ]; then
|
|
EXTRA_CHECK_UNITS+=(homeassistant esphome)
|
|
fi
|
|
if [ "$ENABLE_FRIGATE" = 1 ]; then
|
|
EXTRA_CHECK_UNITS+=(frigate)
|
|
fi
|
|
}
|
|
|
|
classify_unit() { # classify_unit <ActiveState> <Result> <ExecMainStatus> -> ok | finished | wait | warn
|
|
case "$1" in
|
|
active) echo ok ;;
|
|
activating|reloading) echo wait ;;
|
|
inactive) if [ "${2:-}" = success ] && [ "${3:-}" = 0 ]; then echo finished; else echo warn; fi ;;
|
|
*) echo warn ;;
|
|
esac
|
|
}
|
|
|
|
classify_radio() { # stdin: `iw dev <if> info` text -> beaconing (has an ssid line) | silent
|
|
local line
|
|
while IFS= read -r line || [ -n "$line" ]; do
|
|
line=${line#"${line%%[![:space:]]*}"}
|
|
case "$line" in "ssid "*) echo beaconing; return 0 ;; esac
|
|
done
|
|
echo silent
|
|
}
|
|
|
|
post_check() { # read-only live checks; every probe is guarded, warns instead of aborting
|
|
set_units
|
|
echo "== post-deploy check =="
|
|
local u pending=() still=() n f out
|
|
local -A radio=([hostapd]=$WIFI_5G_IFACE [hostapd-2g]=$WIFI_2G_IFACE)
|
|
# One shared deadline: probes are retried ~1/s until it passes (0 = single attempt),
|
|
# since a restart just before may not have settled yet.
|
|
local deadline=$((SECONDS + ${POSTCHECK_WAIT:-15}))
|
|
retry() { until "$@"; do [ "$SECONDS" -lt "$deadline" ] || return 1; sleep 1; done; }
|
|
# a. units (AP units are judged under (f))
|
|
for u in "${ENABLE_UNITS[@]}" "${EXTRA_CHECK_UNITS[@]}"; do
|
|
if [ -n "${radio[$u]:-}" ] && ! ip link show dev "${radio[$u]}" >/dev/null 2>&1; then continue; fi
|
|
pending+=("$u")
|
|
done
|
|
still=("${pending[@]}")
|
|
local -A verdict=() detail=()
|
|
local k v as res st ls
|
|
while :; do
|
|
local next=()
|
|
for u in "${still[@]}"; do
|
|
as= res= st= ls=
|
|
while IFS='=' read -r k v; do
|
|
case "$k" in LoadState) ls=$v ;; ActiveState) as=$v ;; Result) res=$v ;; ExecMainStatus) st=$v ;; esac
|
|
done < <(systemctl show -p LoadState,ActiveState,Result,ExecMainStatus "$u" 2>/dev/null || true)
|
|
verdict[$u]=$(classify_unit "$as" "$res" "$st")
|
|
[ "$ls" = loaded ] || { verdict[$u]=warn; as="${as:-?}(LoadState=${ls:-?})"; }
|
|
detail[$u]="ActiveState=${as:-?} Result=${res:-?}"
|
|
case "${verdict[$u]}" in ok|finished) ;; *) next+=("$u") ;; esac
|
|
done
|
|
still=("${next[@]}")
|
|
[ ${#still[@]} -eq 0 ] && break
|
|
[ "$SECONDS" -lt "$deadline" ] || break
|
|
sleep 1
|
|
done
|
|
for u in "${pending[@]}"; do
|
|
case "${verdict[$u]:-warn}" in
|
|
ok) echo " ok unit $u active" ;;
|
|
finished) echo " ok unit $u finished (exit 0)" ;;
|
|
*) warn "post-deploy: unit $u is not active (${detail[$u]:-state unknown})" ;;
|
|
esac
|
|
done
|
|
# b. bridge address
|
|
has_br0_addr() { local o; o=$(ip -4 -br addr show dev br0 2>/dev/null) || true; [[ $o == *"$GATEWAY_IP/$GATEWAY_PREFIX"* ]]; }
|
|
if retry has_br0_addr; then echo " ok br0 has $GATEWAY_IP/$GATEWAY_PREFIX"
|
|
else warn "post-deploy: br0 does not have $GATEWAY_IP/$GATEWAY_PREFIX"; fi
|
|
# c. LAN ports picked up our .network files (not netplan's catch-all)
|
|
uses_file() { local o; o=$(networkctl status "$1" 2>/dev/null) || true; [[ $o == *"/etc/systemd/network/$2"* ]]; }
|
|
for f in "$LAN_IFACE:05-van-lan.network" "${ONBOARD_LAN_IFACE:-}:06-van-lan-eth0.network"; do
|
|
n=${f%%:*}; [ -n "$n" ] || continue
|
|
if ! ip link show dev "$n" >/dev/null 2>&1; then warn "post-deploy: LAN port $n is absent"
|
|
elif retry uses_file "$n" "${f#*:}"; then echo " ok $n uses ${f#*:}"
|
|
else warn "post-deploy: $n is not using /etc/systemd/network/${f#*:} (another .network file shadows it?)"; fi
|
|
done
|
|
# d. NAT
|
|
has_nat() { local o; o=$(nft list ruleset 2>/dev/null) || true
|
|
[[ $o == *"ip saddr $GATEWAY_NETWORK"*masquerade* ]]; }
|
|
if retry has_nat; then echo " ok NAT masquerade for $GATEWAY_NETWORK"
|
|
elif [ "$(id -u)" != 0 ]; then warn "post-deploy: no masquerade rule for ip saddr $GATEWAY_NETWORK found (nft list ruleset needs root to read)"
|
|
else warn "post-deploy: NAT rule for $GATEWAY_NETWORK not found"; fi
|
|
# e. DHCP
|
|
has_dhcp() { local o; o=$(ss -ulnH 2>/dev/null | awk '{print $4}') || true; [[ $'\n'$o == *:67$'\n'* || $o == *:67 ]]; }
|
|
if retry has_dhcp; then echo " ok dnsmasq bound to UDP 67"
|
|
else warn "post-deploy: nothing bound to UDP port 67 (dnsmasq DHCP)"; fi
|
|
# f. AP radios (present but no ssid = hostapd is not beaconing)
|
|
radio_beaconing() { out=$(iw dev "$1" info 2>/dev/null) || return 1
|
|
[ "$(classify_radio <<<"$out")" = beaconing ]; }
|
|
for n in "$WIFI_5G_IFACE" "$WIFI_2G_IFACE"; do
|
|
u=hostapd; [ "$n" = "$WIFI_5G_IFACE" ] || u=hostapd-2g
|
|
out=
|
|
if retry radio_beaconing "$n"; then
|
|
echo " ok radio $n: $(echo "$out" | grep -E 'ssid|channel' | sed 's/^[[:space:]]*//' | tr '\n' ';')"
|
|
elif [ -z "$out" ]; then warn "post-deploy: radio $n not present (its hostapd keeps retrying until it appears)"
|
|
else warn "post-deploy: radio $n is present but not beaconing (no ssid) — check: journalctl -u $u -n 30"; fi
|
|
done
|
|
# g. uplink
|
|
out=$(ip route show default 2>/dev/null) || true
|
|
if [ -z "$out" ]; then warn "post-deploy: no default route"
|
|
elif ping -c1 -W2 1.1.1.1 >/dev/null 2>&1; then echo " ok uplink: default route, 1.1.1.1 reachable"
|
|
else warn "post-deploy: default route present but 1.1.1.1 does not answer ping"; fi
|
|
if [ "$ENABLE_NM_WAN" = 1 ]; then
|
|
local sysnet=${VANLINK_SYSNET:-/sys/class/net} nmst fst as_f as_l
|
|
# h. NetworkManager must leave the AP/LAN radios and ports alone
|
|
nmst=$(nmcli -t -f DEVICE,STATE device 2>/dev/null) || nmst=
|
|
for n in "$WIFI_5G_IFACE" "$WIFI_2G_IFACE" "$LAN_IFACE" "${ONBOARD_LAN_IFACE:-}"; do
|
|
[ -n "$n" ] && [ -e "$sysnet/$n" ] || continue
|
|
if [[ $'\n'$nmst == *$'\n'"$n:unmanaged"* ]]; then echo " ok NetworkManager leaves $n unmanaged"
|
|
else warn "post-deploy: NetworkManager manages $n (or its state is unknown) — expected unmanaged; check /etc/NetworkManager/conf.d/"; fi
|
|
done
|
|
# i. cellular connection
|
|
if [ -n "${CELLULAR_APN:-}" ]; then
|
|
if cellular_profile_exists; then
|
|
echo " ok NetworkManager connection $CELLULAR_CONN_NAME exists"
|
|
else warn "post-deploy: NetworkManager connection $CELLULAR_CONN_NAME not found"; fi
|
|
fi
|
|
# j. van-failover state: "present" = the device has an active NM connection, so an
|
|
# unplugged/out-of-range WAN is normal; only a device WITH link and present:false is actionable
|
|
fst=${VANLINK_FAILOVER_STATE:-/run/van-failover/state.json}
|
|
fo_read() { # parses the state file (needs a valid "updated" and "wans"); sets $out
|
|
out=$(python3 - "$fst" "$sysnet" 2>/dev/null <<'PY'
|
|
import json, os, sys, time
|
|
try:
|
|
with open(sys.argv[1]) as f:
|
|
d = json.load(f)
|
|
time.strptime(d["updated"], "%Y-%m-%dT%H:%M:%S%z")
|
|
for w in d["wans"]:
|
|
dev = w.get("device") or ""
|
|
if not dev or not os.path.exists(os.path.join(sys.argv[2], dev)):
|
|
continue
|
|
try:
|
|
with open(os.path.join(sys.argv[2], dev, "carrier")) as c:
|
|
if c.read().strip() != "1":
|
|
continue
|
|
except Exception:
|
|
continue
|
|
print(("ok" if w.get("present") is True else "nocon"), w.get("name", "?"), dev)
|
|
except Exception:
|
|
sys.exit(3)
|
|
PY
|
|
)
|
|
}
|
|
if ! command -v python3 >/dev/null 2>&1; then warn "post-deploy: python3 not available — cannot read the van-failover state"
|
|
elif retry fo_read; then
|
|
while read -r as_f as_l n; do
|
|
[ -n "$as_f" ] || continue
|
|
if [ "$as_f" = ok ]; then echo " ok van-failover: WAN $as_l ($n) has an active NetworkManager connection"
|
|
else warn "post-deploy: $as_l ($n) has link but no active NetworkManager connection — not handed to NM yet (./deploy.sh --apply-network) or its profile is missing"; fi
|
|
done <<<"$out"
|
|
else warn "post-deploy: van-failover state $fst missing or unreadable"; fi
|
|
# k. netplan drift
|
|
f=$(nm_wan_state_netplan)
|
|
case "$f" in
|
|
matches) echo " ok WAN netplan matches" ;;
|
|
unreadable) echo " ok WAN netplan: cannot read as non-root (run with sudo to verify)" ;;
|
|
*) warn "post-deploy: WAN netplan $f — run ./deploy.sh --apply-network" ;;
|
|
esac
|
|
# k2. once the WAN netplan is applied NM owns the uplink port; a networkd that still lists it
|
|
# configured/configuring holds a stale in-memory claim (cured by networkctl reload).
|
|
# Before the apply networkd legitimately owns it: say nothing.
|
|
if [ "$f" = matches ] && [ -e "$sysnet/$STARLINK_IFACE" ] && command -v networkctl >/dev/null 2>&1; then
|
|
out=$(networkctl --no-pager --no-legend list 2>/dev/null | awk -v i="$STARLINK_IFACE" '$2 == i { print $5; exit }') || out=
|
|
case "$out" in
|
|
configured|configuring) warn "post-deploy: networkd still manages $STARLINK_IFACE although NetworkManager owns it — run: networkctl reload" ;;
|
|
unmanaged) echo " ok networkd leaves $STARLINK_IFACE to NetworkManager" ;;
|
|
esac
|
|
fi
|
|
# l. last --apply-network
|
|
as_f=${VANLINK_APPLY_STATUS:-/var/lib/vanlink/apply-network.status}
|
|
if [ -r "$as_f" ]; then
|
|
as_l=$(grep -m1 '[^[:space:]]' "$as_f" 2>/dev/null) || as_l=
|
|
case "${as_l%% *}" in
|
|
"") ;;
|
|
ok) echo " ok last --apply-network: $as_l" ;;
|
|
running|rolled-back|rollback-failed) warn "post-deploy: last --apply-network status: $as_l — see /var/log/vanlink-apply-network.log" ;;
|
|
*) warn "post-deploy: unrecognised apply-network status: $as_l" ;;
|
|
esac
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# --apply-network time budgets (seconds), in one place; all derived from the AN_* constants.
|
|
# (netplan generate/apply run under timeout -k AN_KILL_T: +AN_KILL_T each in the worst case)
|
|
# networkd reload AN_ND = networkctl reload (timeout AN_RELOAD_T) + settle sleep AN_SETTLE + port state line (AN_NM_T);
|
|
# runs once after each netplan apply (forward path and rollback)
|
|
# forward path AN_FWD = NM conf reload + generate + apply + 2*kill + AN_ND + van-br0-setup (unit check + restart)
|
|
# + stage 1 + restart + stage 2 + networkd info line + diagnostics (logged once, on a failed gate)
|
|
# rollback path AN_RB = generate + apply + 2*kill + AN_ND + NM conf reload + van-br0-setup (unit check + restart) + restart + connectivity recheck
|
|
# helper worst case AN_HELPER_MAX = AN_FWD + AN_RB + AN_SLOP (loop iterations overshoot their
|
|
# deadline by a few nmcli/ping timeouts)
|
|
# foreground waits AN_WAIT = AN_HELPER_MAX + 30
|
|
# transient unit: RuntimeMaxSec = AN_HELPER_MAX + 60 (backstop; systemd then sends TERM and the
|
|
# helper's trap runs the restore), TimeoutStopSec = AN_RB + 30 (time the restore may take).
|
|
# van-failover starts optimistic and probes every WAN at once (probe_timeout 3 s), enforcing the
|
|
# route in its first loop, so a healthy default route shows up within seconds of a restart; the
|
|
# 120 s stage 2 deadline is a wide margin for a slow Starlink/cellular probe.
|
|
AN_KILL_T=10 AN_APPLY_T=90 AN_GEN_T=30 AN_NM_T=5 AN_RESTART_T=30 AN_S1=60 AN_S2=120 AN_RC=60 AN_SLOP=60
|
|
AN_RELOAD_T=10 AN_SETTLE=3
|
|
AN_ND=$(( AN_RELOAD_T + AN_SETTLE + AN_NM_T ))
|
|
AN_DIAG=$(( 5 * AN_NM_T )) # diag(): five commands, each under timeout AN_NM_T
|
|
AN_FWD=$(( AN_NM_T + AN_GEN_T + AN_APPLY_T + 2 * AN_KILL_T + AN_ND + AN_NM_T + AN_RESTART_T + AN_S1 + AN_RESTART_T + AN_S2 + AN_NM_T + AN_DIAG ))
|
|
AN_RB=$(( AN_GEN_T + AN_APPLY_T + 2 * AN_KILL_T + AN_ND + AN_NM_T + AN_NM_T + AN_RESTART_T + AN_RESTART_T + AN_RC ))
|
|
AN_HELPER_MAX=$(( AN_FWD + AN_RB + AN_SLOP ))
|
|
AN_WAIT=$(( AN_HELPER_MAX + 30 ))
|
|
AN_RUNMAX=$(( AN_HELPER_MAX + 60 ))
|
|
AN_STOP_T=$(( AN_RB + 30 ))
|
|
|
|
apply_status_blocks_run() { # apply_status_blocks_run <status-file> -> yes|no: a run that is/was in flight or failed to roll back blocks a new one
|
|
case "$(cut -d' ' -f1 "$1" 2>/dev/null || true)" in
|
|
running|rollback-failed) echo yes ;;
|
|
*) echo no ;;
|
|
esac
|
|
}
|
|
|
|
# apply_helper_script <backup-dir> [netplan-dir] [log] [status-file] [sysnet-dir] [rendered-file] [deadlines "s1 s2 rc"] [run-stamp] [nm-conf-dir]
|
|
# The script the detached unit runs. Paths are parameters only so tests can bake
|
|
# sandbox paths into the text; the production helper reads no environment.
|
|
apply_helper_script() {
|
|
local bak=$1 nd=${2:-/etc/netplan} log=${3:-/var/log/vanlink-apply-network.log}
|
|
local st=${4:-/var/lib/vanlink/apply-network.status} sn=${5:-/sys/class/net}
|
|
local rf=${6:-/run/vanlink-50-van-wan.yaml} dl=${7:-"$AN_S1 $AN_S2 $AN_RC"} stamp=${8:-manual}
|
|
local ncd=${9:-$(dirname "$NM_PENDING_CONF")} pc=${NM_PENDING_CONF##*/}
|
|
local d1 d2 d3
|
|
read -r d1 d2 d3 <<< "$dl"
|
|
# Unquoted heredoc on purpose: values expand now; \$... stays for run time.
|
|
cat <<HELPER
|
|
#!/bin/bash
|
|
# Generated by deploy.sh --apply-network; runs detached. Installs the rendered WAN netplan,
|
|
# removes the NM conf that kept NM off the uplink ($pc), applies, verifies the uplink in two
|
|
# stages and restores the pre-run netplan (and $pc) on any failure (including TERM/INT/HUP,
|
|
# e.g. systemd stopping the unit at its RuntimeMaxSec).
|
|
# Stage 1 (${d1}s): the apply succeeded and, if the Starlink port exists, NM shows it connected
|
|
# via a netplan-* profile with an IPv4 address whose gateway (IP4.GATEWAY, else the DHCP
|
|
# routers option: never-default hides IP4.GATEWAY) answers on-link.
|
|
# Stage 2 (${d2}s): van-failover restarted; default route and internet ping, and (port present)
|
|
# van-failover's own default route on the port (proto static; the NM profile installs none).
|
|
# A failed gate logs diagnostics (NM, DHCP routers, networkd, addresses, routes) before restoring.
|
|
bak='$bak'
|
|
nd='$nd'
|
|
log='$log'
|
|
st='$st'
|
|
sn='$sn'
|
|
rf='$rf'
|
|
ncd='$ncd'
|
|
exec >>"\$log" 2>&1
|
|
trap 'rm -f "\$0"' EXIT
|
|
status() { mkdir -p "\$(dirname "\$st")"; echo "\$1 \$(date -Is)\${2:+ \$2}" > "\$st"; }
|
|
echo "== apply-network $stamp \$(date -Is) (backup: \$bak)"
|
|
conn_ok() { ip route show default | grep . >/dev/null && ping -c1 -W2 1.1.1.1 >/dev/null 2>&1; }
|
|
gate2() {
|
|
conn_ok || return 1
|
|
[ -e "\$sn/$STARLINK_IFACE" ] || return 0
|
|
ip route show default dev '$STARLINK_IFACE' proto static | grep . >/dev/null
|
|
}
|
|
diag() { # diag <stage>: uplink state for the log; informational, every command bounded and failure-tolerant
|
|
echo "--- diagnostics: \$1"
|
|
echo "--- nmcli device show $STARLINK_IFACE"
|
|
timeout $AN_NM_T nmcli -g GENERAL.STATE,GENERAL.CONNECTION,IP4.ADDRESS,IP4.GATEWAY device show '$STARLINK_IFACE' 2>&1
|
|
echo "--- DHCP4 routers"
|
|
timeout $AN_NM_T nmcli -g DHCP4.OPTION device show '$STARLINK_IFACE' 2>&1 | tr '|' '\\n' | grep -E '^ *routers ='
|
|
echo "--- networkctl status $STARLINK_IFACE"
|
|
timeout $AN_NM_T networkctl --no-pager -n 0 status '$STARLINK_IFACE' 2>&1 | head -8
|
|
echo "--- ip -4 addr show $STARLINK_IFACE"
|
|
timeout $AN_NM_T ip -4 addr show '$STARLINK_IFACE' 2>&1
|
|
echo "--- ip route"
|
|
timeout $AN_NM_T ip route 2>&1
|
|
echo "--- end diagnostics"
|
|
return 0
|
|
}
|
|
gate1() {
|
|
[ -e "\$sn/$STARLINK_IFACE" ] || return 0
|
|
[ "\$(timeout $AN_NM_T nmcli -g GENERAL.STATE device show '$STARLINK_IFACE' 2>/dev/null)" = "100 (connected)" ] || return 1
|
|
case "\$(timeout $AN_NM_T nmcli -g GENERAL.CONNECTION device show '$STARLINK_IFACE' 2>/dev/null)" in netplan-*) ;; *) return 1 ;; esac
|
|
a=\$(timeout $AN_NM_T nmcli -g IP4.ADDRESS device show '$STARLINK_IFACE' 2>/dev/null)
|
|
[ -n "\$a" ] && [ "\$a" != -- ] || return 1
|
|
g=\$(timeout $AN_NM_T nmcli -g IP4.GATEWAY device show '$STARLINK_IFACE' 2>/dev/null)
|
|
case "\$g" in
|
|
''|--) g=\$(timeout $AN_NM_T nmcli -g DHCP4.OPTION device show '$STARLINK_IFACE' 2>/dev/null | tr '|' '\\n' | sed -n 's/^ *routers = *//p' | head -1 | cut -d' ' -f1) ;;
|
|
esac
|
|
[ -n "\$g" ] && [ "\$g" != -- ] || return 1
|
|
ping -c1 -W2 -I '$STARLINK_IFACE' "\$g" >/dev/null 2>&1
|
|
}
|
|
nd_reload() { # nd_reload [note]: after a netplan apply networkd may keep a removed file's config in memory; reload it (never fatal, never gating)
|
|
command -v networkctl >/dev/null 2>&1 || return 0
|
|
timeout $AN_RELOAD_T networkctl reload || echo "networkctl reload failed (continuing)"
|
|
sleep $AN_SETTLE
|
|
local l
|
|
l=\$(timeout $AN_NM_T networkctl --no-pager --no-legend list 2>/dev/null | awk -v i='$STARLINK_IFACE' '\$2 == i { print; exit }')
|
|
echo "networkd after reload: \${l:-$STARLINK_IFACE not listed}"
|
|
case " \$l " in
|
|
*" configured "*|*" configuring "*) [ -z "\${1:-}" ] || echo "networkd still manages $STARLINK_IFACE (NetworkManager should own it)" ;;
|
|
esac
|
|
return 0
|
|
}
|
|
route_log() { echo "route to 1.1.1.1: \$(ip route get 1.1.1.1 2>&1 | head -1)"; }
|
|
in_restore=0
|
|
restore() { # restore <reason>: put the pre-run netplan back, re-check connectivity, always exit 1 (runs once)
|
|
trap '' TERM INT HUP
|
|
[ "\$in_restore" = 0 ] || exit 1
|
|
in_restore=1
|
|
local rb=ok c=down
|
|
echo "apply-network FAILED (\$1) - restoring \$bak"
|
|
route_log
|
|
if [ -d "\$bak" ]; then
|
|
rm -f "\$nd"/* "\$nd"/.[!.]*
|
|
cp -a "\$bak"/. "\$nd"/ || rb=CP-FAILED
|
|
rm -f "\$nd/nm-pending.conf" # the backed-up NM conf is not a netplan file
|
|
# the NM conf that kept NM off the uplink goes back too; NM re-reads it after the re-apply below
|
|
[ ! -f "\$bak/nm-pending.conf" ] || cp -a "\$bak/nm-pending.conf" "\$ncd/$pc" || echo "WARNING: could not restore \$ncd/$pc"
|
|
else
|
|
# No backup to restore from: at least undo this helper's own two changes.
|
|
rb=BACKUP-MISSING
|
|
rm -f "\$nd/50-van-wan.yaml"
|
|
[ ! -f "\$nd/10-dhcp-all-interfaces.yaml.vanlink-disabled" ] || mv "\$nd/10-dhcp-all-interfaces.yaml.vanlink-disabled" "\$nd/10-dhcp-all-interfaces.yaml"
|
|
fi
|
|
timeout -k $AN_KILL_T $AN_GEN_T netplan generate && timeout -k $AN_KILL_T $AN_APPLY_T netplan apply || { [ "\$rb" != ok ] || rb=APPLY-FAILED; }
|
|
nd_reload # the old config is back: networkd's in-memory state changes the other way
|
|
[ ! -f "\$ncd/$pc" ] || timeout $AN_NM_T nmcli general reload conf || echo "nmcli general reload conf failed"
|
|
# the re-apply restarted networkd too, which can drop br0's members (as on the forward path; not gating)
|
|
if timeout $AN_NM_T systemctl cat van-br0-setup >/dev/null 2>&1; then
|
|
timeout $AN_RESTART_T systemctl restart van-br0-setup || echo "van-br0-setup restart failed (continuing)"
|
|
fi
|
|
timeout $AN_RESTART_T systemctl restart van-failover || true
|
|
end=\$((SECONDS+$d3))
|
|
while :; do
|
|
conn_ok && { c=ok; break; }
|
|
[ "\$SECONDS" -ge "\$end" ] && break
|
|
sleep 1
|
|
done
|
|
rm -f "\$rf"
|
|
if [ "\$rb" = ok ] && [ "\$c" = ok ]; then
|
|
echo "apply-network ROLLED BACK (restored, connectivity ok)"
|
|
status rolled-back "\$1"
|
|
elif [ "\$rb" = ok ]; then
|
|
echo "apply-network ROLLED BACK (restored, but no connectivity - check the uplink/cable)"
|
|
status rolled-back "restored-no-connectivity; \$1"
|
|
else
|
|
echo "apply-network ROLLBACK FAILED: \$rb / connectivity \$c"
|
|
status rollback-failed "\$1; \$rb / connectivity \$c"
|
|
# Reboot (boot uses the files on disk) only when a restore was attempted and failed, and there is no connectivity.
|
|
case "\$rb" in
|
|
CP-FAILED|APPLY-FAILED) [ "\$c" = ok ] || { echo "rollback failed and no connectivity - rebooting"; systemctl reboot; } ;;
|
|
esac
|
|
fi
|
|
exit 1
|
|
}
|
|
pending_off() { # hand the uplink to NM: drop the NM conf that kept NM off it, right before the apply
|
|
[ -e "\$ncd/$pc" ] || return 0
|
|
rm -f "\$ncd/$pc" || return 1
|
|
timeout $AN_NM_T nmcli general reload conf || echo "nmcli general reload conf failed (continuing; stage 1 decides)"
|
|
return 0
|
|
}
|
|
status running "\$bak"
|
|
trap 'restore terminated' TERM INT HUP
|
|
applied=0
|
|
if install -m0600 "\$rf" "\$nd/50-van-wan.yaml" \\
|
|
&& { [ ! -f "\$nd/10-dhcp-all-interfaces.yaml" ] || mv "\$nd/10-dhcp-all-interfaces.yaml" "\$nd/10-dhcp-all-interfaces.yaml.vanlink-disabled"; } \\
|
|
&& pending_off \\
|
|
&& timeout -k $AN_KILL_T $AN_GEN_T netplan generate && timeout -k $AN_KILL_T $AN_APPLY_T netplan apply; then
|
|
applied=1
|
|
else
|
|
echo "netplan install/generate/apply failed"
|
|
fi
|
|
s1=0
|
|
if [ "\$applied" = 1 ]; then
|
|
nd_reload note # the Armbian catch-all .network is gone from disk but networkd still holds it until reloaded
|
|
# netplan apply restarts networkd, which can drop br0's members: re-run the bridge setup (not gating)
|
|
if timeout $AN_NM_T systemctl cat van-br0-setup >/dev/null 2>&1; then
|
|
timeout $AN_RESTART_T systemctl restart van-br0-setup || echo "van-br0-setup restart failed (continuing)"
|
|
fi
|
|
end=\$((SECONDS+$d1))
|
|
while :; do
|
|
gate1 && { s1=1; break; }
|
|
[ "\$SECONDS" -ge "\$end" ] && break
|
|
sleep 1
|
|
done
|
|
fi
|
|
[ "\$s1" = 1 ] || { diag "stage 1"; restore "stage 1: apply or uplink gate failed"; }
|
|
timeout $AN_RESTART_T systemctl restart van-failover || restore "van-failover restart failed"
|
|
s2=0
|
|
end=\$((SECONDS+$d2))
|
|
while :; do
|
|
gate2 && { s2=1; break; }
|
|
[ "\$SECONDS" -ge "\$end" ] && break
|
|
sleep 1
|
|
done
|
|
route_log
|
|
[ "\$s2" = 1 ] || { diag "stage 2"; restore "stage 2: no default route, no van-failover route on the port, or no internet"; }
|
|
nwl=\$(timeout $AN_NM_T networkctl --no-pager --no-legend list 2>/dev/null | awk -v i='$STARLINK_IFACE' '\$2 == i { print; exit }')
|
|
echo "networkd (info, not gating): \${nwl:-$STARLINK_IFACE not listed}"
|
|
rm -f "\$rf"
|
|
status ok
|
|
trap - TERM INT HUP
|
|
echo "apply-network OK"
|
|
exit 0
|
|
HELPER
|
|
}
|
|
|
|
apply_network() { # ./deploy.sh --apply-network [--force] — explicit, root; changes nothing under /etc/netplan itself (the detached helper does); see spec §4
|
|
local force=0
|
|
[ "${1:-}" = --force ] && force=1
|
|
[ "$(id -u)" = 0 ] || die "--apply-network needs root (sudo)"
|
|
[ "$ENABLE_NM_WAN" = 1 ] || die "ENABLE_NM_WAN is 0 in $VANLINK_CONF — nothing to apply"
|
|
nm_pkg_installed || die "network-manager is not installed — run ./deploy.sh first"
|
|
systemctl is-active --quiet NetworkManager || die "NetworkManager is not running — handing it the uplink port would flap it"
|
|
systemctl cat van-failover >/dev/null 2>&1 || die "van-failover.service does not exist — run ./deploy.sh first (stage 2 of the gate needs it)"
|
|
systemctl is-active --quiet vanlink-apply-network && die "an apply is already running — see /var/log/vanlink-apply-network.log"
|
|
local log=/var/log/vanlink-apply-network.log st=/var/lib/vanlink/apply-network.status
|
|
if [ "$force" = 0 ] && [ "$(apply_status_blocks_run "$st")" = yes ]; then
|
|
die "the last apply did not finish cleanly: $(cat "$st" 2>/dev/null) — inspect $st and $log, check the backup dir named there, then re-run with --force"
|
|
fi
|
|
local np_state problems
|
|
np_state=$(VANLINK_WAN_NETPLAN='' nm_wan_state_netplan)
|
|
if [ "$force" = 0 ] && [ "$np_state" = matches ] && [ ! -e /etc/netplan/10-dhcp-all-interfaces.yaml ]; then
|
|
echo "nothing to apply (WAN netplan already matches; use --force to re-apply)"
|
|
return 0
|
|
fi
|
|
problems=$(apply_preflight_problems "$VANLINK_CONF" /sys/class/net "$(hostname -s)")
|
|
if [ -n "$problems" ] && [ "$force" = 0 ]; then
|
|
die "refusing to apply:
|
|
$problems
|
|
(fix it, or re-run with --force)"
|
|
fi
|
|
if [ "$force" = 0 ] && { [ "$np_state" = differs ] || [ "$np_state" = unreadable ]; }; then
|
|
echo "/etc/netplan/50-van-wan.yaml exists and differs from the rendered template (secrets redacted):"
|
|
diff -u /etc/netplan/50-van-wan.yaml <(render_wan_netplan) | redact_secrets | sed 's/^/ /' || true
|
|
die "refusing to replace an existing, different WAN netplan without --force (review the diff above)"
|
|
fi
|
|
local stamp helper rendered bak pt
|
|
stamp=$(date +%Y%m%d-%H%M%S)-$$
|
|
rendered=/run/vanlink-50-van-wan-$stamp.yaml
|
|
helper=/run/vanlink-apply-network-$stamp.sh
|
|
(umask 077; render_wan_netplan > "$rendered") || die "render failed"
|
|
check_rendered ap/50-van-wan.yaml "$rendered" || { rm -f "$rendered"; exit 1; }
|
|
bak=$(mktemp -d "/var/backups/vanlink-netplan-$stamp.XXXX") || { rm -f "$rendered"; die "cannot create backup dir"; }
|
|
cp -a /etc/netplan/. "$bak/" || { rm -f "$rendered"; die "backup failed — nothing changed"; }
|
|
# the NM conf keeping NM off the uplink: the helper removes it right before the apply, a rollback restores it from here
|
|
if [ -e "$NM_PENDING_CONF" ]; then
|
|
cp -a "$NM_PENDING_CONF" "$bak/nm-pending.conf" || { rm -f "$rendered"; die "backup of $NM_PENDING_CONF failed — nothing changed"; }
|
|
fi
|
|
if [ ! -e /var/backups/vanlink-netplan-orig ] && [ ! -e /etc/netplan/50-van-wan.yaml ]; then
|
|
pt=/var/backups/vanlink-netplan-orig.tmp.$$
|
|
rm -rf "$pt"
|
|
install -d -m0700 "$pt"
|
|
cp -a /etc/netplan/. "$pt/" || { rm -rf "$pt"; rm -f "$rendered"; die "pristine backup failed — nothing changed"; }
|
|
mv "$pt" /var/backups/vanlink-netplan-orig || { rm -rf "$pt"; rm -f "$rendered"; die "pristine backup could not be moved into place — nothing changed"; }
|
|
fi
|
|
install -d -m0755 /var/lib/vanlink
|
|
rm -f "$st"
|
|
apply_helper_script "$bak" /etc/netplan "$log" "$st" /sys/class/net "$rendered" "$AN_S1 $AN_S2 $AN_RC" "$stamp" "$(dirname "$NM_PENDING_CONF")" > "$helper"
|
|
chmod 0700 "$helper"
|
|
echo "backup: $bak log: $log"
|
|
echo "applying from a detached unit (survives an SSH drop); waiting up to $AN_WAIT s ..."
|
|
systemctl reset-failed vanlink-apply-network 2>/dev/null || true
|
|
systemd-run --unit=vanlink-apply-network --collect -p RuntimeMaxSec="$AN_RUNMAX" -p TimeoutStopSec="$AN_STOP_T" /bin/bash "$helper" >/dev/null \
|
|
|| { rm -f "$helper" "$rendered"; die "systemd-run failed — nothing was changed (backup: $bak)"; }
|
|
SECONDS=0
|
|
while systemctl is-active --quiet vanlink-apply-network && [ "$SECONDS" -lt "$AN_WAIT" ]; do sleep 1; done
|
|
awk -v s="== apply-network $stamp" 'index($0, s) == 1 { p = 1 } p' "$log" 2>/dev/null | tail -n 8 || true
|
|
if systemctl is-active --quiet vanlink-apply-network; then
|
|
echo "still running — check $log"
|
|
return 2
|
|
fi
|
|
local verdict
|
|
verdict=$(cut -d' ' -f1 "$st" 2>/dev/null || true)
|
|
case "$verdict" in
|
|
ok) return 0 ;;
|
|
rolled-back|rollback-failed) echo "apply-network: $(cat "$st") (previous config: $bak)" >&2; return 1 ;;
|
|
*) echo "apply-network: no final status — see $log (previous config: $bak)" >&2; return 1 ;;
|
|
esac
|
|
}
|
|
|
|
case "${1:-}" in
|
|
--templates)
|
|
template_files
|
|
exit 0 ;;
|
|
--check) # ./deploy.sh --check [conf] — validate conf, render every template, install nothing
|
|
load_conf "${2:-$VANLINK_CONF}"
|
|
rc=0
|
|
tmp=$(mktemp)
|
|
for f in $(template_files); do
|
|
render "$f" > "$tmp"
|
|
check_rendered "$f" "$tmp" || rc=1
|
|
done
|
|
rm -f "$tmp"
|
|
[ "$rc" -eq 0 ] && echo "check OK: $(template_files | wc -l) templates render cleanly"
|
|
exit "$rc" ;;
|
|
--diff) # ./deploy.sh --diff [conf] — what would change in /etc, without installing
|
|
load_conf "${2:-$VANLINK_CONF}"
|
|
grep -E '^[[:space:]]*install_rendered +[^" ]+ +/' deploy.sh | while read -r _ src dst _; do
|
|
if [ ! -e "$dst" ]; then
|
|
echo "NEW $dst"
|
|
elif ! diff -q <(render "$src") "$dst" >/dev/null; then
|
|
echo "CHANGED $dst"
|
|
diff -u "$dst" <(render "$src") | redact_secrets | sed 's/^/ /' || true
|
|
fi
|
|
done
|
|
# Also lists plain `install` files and `rm -f` targets — these sections may be
|
|
# flag-gated in the real run, but --diff reports them regardless of the flag.
|
|
grep -E '^[[:space:]]*install -D -m[0-9]+ +[^" ]+ +/' deploy.sh | while read -r _ _ mode src dst _; do
|
|
# seed-if-absent secret files (from *.example, or 0600): never diff or print
|
|
case "$src" in *.example) continue ;; esac
|
|
[ "$mode" = -m0600 ] && continue
|
|
if [ ! -e "$dst" ]; then
|
|
echo "NEW $dst"
|
|
elif ! cmp -s "$src" "$dst"; then
|
|
echo "CHANGED $dst"
|
|
diff -u "$dst" "$src" | redact_secrets | sed 's/^/ /' || true
|
|
fi
|
|
done
|
|
grep -E '^[[:space:]]*rm -f +/' deploy.sh | while read -r _ _ path _; do
|
|
[ -e "$path" ] && echo "REMOVE $path"
|
|
done || true
|
|
exit 0 ;;
|
|
--redact) # ./deploy.sh --redact — stdin through redact_secrets (no config, no root)
|
|
redact_secrets
|
|
exit 0 ;;
|
|
--apply-network) # ./deploy.sh --apply-network [--force] — root; applies the WAN netplan from a detached helper with automatic rollback
|
|
load_conf "$VANLINK_CONF"
|
|
apply_network "${2:-}"
|
|
exit $? ;;
|
|
--apply-status-check) # test seam: --apply-status-check <status-file> prints yes|no (does that status block a new --apply-network run?)
|
|
apply_status_blocks_run "${2:?status file}"
|
|
exit 0 ;;
|
|
--print-apply-helper) # [conf] the helper script for review; test-only flags: --backup D --netplan-dir D --log L --status S --sysnet N --rendered R --nm-conf-dir D --deadlines "s1 s2 rc" --stamp T
|
|
shift; pc= a_bak=/var/backups/vanlink-netplan-EXAMPLE a_nd= a_log= a_st= a_sn= a_rf= a_dl= a_stamp= a_ncd=
|
|
while [ $# -gt 0 ]; do
|
|
case "$1" in
|
|
--backup|--netplan-dir|--log|--status|--sysnet|--rendered|--nm-conf-dir|--deadlines|--stamp)
|
|
[ $# -ge 2 ] || die "$1 needs a value" ;;
|
|
esac
|
|
case "$1" in
|
|
--backup) a_bak=$2; shift 2 ;;
|
|
--netplan-dir) a_nd=$2; shift 2 ;;
|
|
--log) a_log=$2; shift 2 ;;
|
|
--status) a_st=$2; shift 2 ;;
|
|
--sysnet) a_sn=$2; shift 2 ;;
|
|
--rendered) a_rf=$2; shift 2 ;;
|
|
--nm-conf-dir) a_ncd=$2; shift 2 ;;
|
|
--deadlines) a_dl=$2; shift 2 ;;
|
|
--stamp) a_stamp=$2; shift 2 ;;
|
|
*) pc=$1; shift ;;
|
|
esac
|
|
done
|
|
load_conf "${pc:-$VANLINK_CONF}"
|
|
apply_helper_script "$a_bak" "$a_nd" "$a_log" "$a_st" "$a_sn" "$a_rf" "$a_dl" "$a_stamp" "$a_ncd"
|
|
exit 0 ;;
|
|
--apply-preflight) # ./deploy.sh --apply-preflight [conf] — the problems --apply-network would refuse on; exit 1 if any
|
|
c=${2:-$VANLINK_CONF}
|
|
load_conf "$c"
|
|
hn=$(hostname -s)
|
|
[ "$(id -u)" = 0 ] || hn=${VANLINK_HOSTNAME:-$hn} # test knob, ignored as root
|
|
out=$(apply_preflight_problems "$c" "${VANLINK_SYSNET:-/sys/class/net}" "$hn")
|
|
[ -z "$out" ] && exit 0
|
|
echo "$out"
|
|
exit 1 ;;
|
|
--render-wan-netplan) load_conf "$VANLINK_CONF"; render_wan_netplan; exit 0 ;;
|
|
--wan-plan) # ./deploy.sh --wan-plan [conf] — what the NM WAN provisioning would do; changes nothing
|
|
load_conf "${2:-$VANLINK_CONF}"
|
|
echo "wan-plan: ENABLE_NM_WAN=$ENABLE_NM_WAN"
|
|
if [ "$ENABLE_NM_WAN" = 1 ]; then
|
|
if [ -n "${WIFI_WAN_IFACE:-}" ]; then echo " wifi WAN: $WIFI_WAN_IFACE"; else echo " wifi WAN: none (wifis stanza omitted)"; fi
|
|
if nm_pkg_installed; then echo " packages: network-manager installed"; else echo " packages: network-manager would install"; fi
|
|
np=$(nm_wan_state_netplan)
|
|
if [ "$np" = unreadable ]; then echo " netplan: /etc/netplan/50-van-wan.yaml unreadable (run with sudo)"; else echo " netplan: /etc/netplan/50-van-wan.yaml $np"; fi
|
|
echo " uplink NM pending conf: $(nm_pending_action "$np" "$NM_PENDING_CONF")"
|
|
if [ -f /etc/netplan/10-dhcp-all-interfaces.yaml ]; then echo " armbian: /etc/netplan/10-dhcp-all-interfaces.yaml present -> would move aside"; else echo " armbian: /etc/netplan/10-dhcp-all-interfaces.yaml absent"; fi
|
|
if [ -z "${CELLULAR_APN:-}" ]; then
|
|
echo " cellular profile: skipped (no CELLULAR_APN)"
|
|
elif cellular_profile_exists; then
|
|
echo " cellular profile: ${CELLULAR_CONN_NAME} apn=${CELLULAR_APN} exists"
|
|
else
|
|
echo " cellular profile: ${CELLULAR_CONN_NAME} apn=${CELLULAR_APN} would create"
|
|
fi
|
|
fi
|
|
exit 0 ;;
|
|
--classify-unit) # ./deploy.sh --classify-unit <ActiveState> <Result> <ExecMainStatus>
|
|
classify_unit "${2:-}" "${3:-}" "${4:-}"
|
|
exit 0 ;;
|
|
--classify-radio) # ./deploy.sh --classify-radio < `iw dev <if> info` text
|
|
classify_radio
|
|
exit 0 ;;
|
|
--post-check) # ./deploy.sh --post-check [conf] — live checks, no root, no install; exit 1 on any warning
|
|
load_conf "${2:-$VANLINK_CONF}"
|
|
post_check
|
|
if [ ${#WARNINGS[@]} -gt 0 ]; then
|
|
echo
|
|
echo "== warnings =="
|
|
for w in "${WARNINGS[@]}"; do echo " -> $w"; done
|
|
exit 1
|
|
fi
|
|
exit 0 ;;
|
|
render)
|
|
[ -n "${2:-}" ] || { echo "Usage: $0 render <file>"; exit 1; }
|
|
load_conf "$VANLINK_CONF"
|
|
render "$2"
|
|
exit 0 ;;
|
|
esac
|
|
|
|
[ "$(id -u)" = 0 ] || { echo "Run with sudo (writes to /etc, /usr)."; exit 1; }
|
|
load_conf "$VANLINK_CONF"
|
|
echo "== host config: $(readlink -f "$VANLINK_CONF") =="
|
|
|
|
# Check for essential package dependencies
|
|
echo "== dependency check =="
|
|
REQUIRED_PACKAGES=(
|
|
hostapd
|
|
iw
|
|
nftables
|
|
dnsmasq
|
|
systemd-resolved
|
|
python3-gps
|
|
python3-bleak
|
|
modemmanager
|
|
usb-modeswitch
|
|
gpsd
|
|
gpsd-clients
|
|
rsync
|
|
mosquitto
|
|
python3-paho-mqtt
|
|
mobile-broadband-provider-info
|
|
zerotier-one
|
|
)
|
|
if [ "$ENABLE_HA" = 1 ]; then
|
|
REQUIRED_PACKAGES+=(podman)
|
|
fi
|
|
OPTIONAL_PACKAGES=(
|
|
)
|
|
missing_pkgs=()
|
|
for pkg in "${REQUIRED_PACKAGES[@]}"; do
|
|
dpkg -s "$pkg" >/dev/null 2>&1 || missing_pkgs+=("$pkg")
|
|
done
|
|
if [ ${#missing_pkgs[@]} -gt 0 ]; then
|
|
echo " installing missing required packages: ${missing_pkgs[*]}"
|
|
apt-get update -qq || echo " -> apt-get update failed (continuing with the cached lists)"
|
|
DEBIAN_FRONTEND=noninteractive apt-get install -y "${missing_pkgs[@]}" \
|
|
|| { echo "deploy: apt-get install failed for: ${missing_pkgs[*]}" >&2; exit 1; }
|
|
fi
|
|
|
|
# Check optional packages
|
|
for pkg in "${OPTIONAL_PACKAGES[@]}"; do
|
|
if ! dpkg -s "$pkg" >/dev/null 2>&1; then
|
|
warn "optional package not installed: $pkg (apt install $pkg)"
|
|
fi
|
|
done
|
|
write_warnings() {
|
|
install -d -m0755 "$(dirname "$WARNINGS_FILE")"
|
|
{
|
|
printf '{\n "deployed": "%s",\n "warnings": [' "$(date -Iseconds)"
|
|
local first=1 w e
|
|
for w in "${WARNINGS[@]}"; do
|
|
[ "$first" = 1 ] || printf ','
|
|
first=0
|
|
e=${w//\\/\\\\}; e=${e//\"/\\\"}
|
|
printf '\n "%s"' "$e"
|
|
done
|
|
printf '\n ]\n}\n'
|
|
} > "$WARNINGS_FILE"
|
|
}
|
|
|
|
# A host file with uncommitted edits means this deploy uses unreviewed values.
|
|
conf_real=$(readlink -f "$VANLINK_CONF")
|
|
if git -c safe.directory='*' -C "$(dirname "$conf_real")" status --porcelain -- "$conf_real" 2>/dev/null | grep -q .; then
|
|
warn "$conf_real has uncommitted changes — commit it so the host config stays reviewable"
|
|
fi
|
|
|
|
if [ "$ENABLE_NM_WAN" != 1 ]; then
|
|
echo "== netplan drift check =="
|
|
# Netplan is never installed by this script (applying it flaps the uplinks —
|
|
# see note below), so it's easy to edit ap/50-van-wan.yaml and forget the
|
|
# manual `netplan apply` step. Warn loudly rather than silently drifting.
|
|
if [ ! -f /etc/netplan/50-van-wan.yaml ]; then
|
|
warn "netplan: /etc/netplan/50-van-wan.yaml is missing — repo config was never deployed. Run: sudo ./deploy.sh --render-wan-netplan | sudo tee /etc/netplan/50-van-wan.yaml && sudo netplan generate && sudo netplan apply"
|
|
elif ! diff -q <(render_wan_netplan) /etc/netplan/50-van-wan.yaml >/dev/null 2>&1; then
|
|
warn "netplan: /etc/netplan/50-van-wan.yaml differs from ap/50-van-wan.yaml (rendered). Deploy manually: sudo ./deploy.sh --render-wan-netplan | sudo tee /etc/netplan/50-van-wan.yaml && sudo netplan generate && sudo netplan apply"
|
|
diff -u /etc/netplan/50-van-wan.yaml <(render_wan_netplan) || true
|
|
fi
|
|
fi
|
|
|
|
echo "== access point =="
|
|
install_rendered ap/hostapd.conf /etc/hostapd/hostapd.conf
|
|
install -D -m0644 ap/hostapd-restart.conf /etc/systemd/system/hostapd.service.d/restart.conf
|
|
install -D -m0644 ap/hostapd-regdomain.conf /etc/systemd/system/hostapd.service.d/regdomain.conf
|
|
install -D -m0644 ap/default-hostapd /etc/default/hostapd
|
|
install_rendered ap/hostapd-2g.conf /etc/hostapd/hostapd-2g.conf
|
|
install_rendered ap/hostapd-2g.service /etc/systemd/system/hostapd-2g.service
|
|
install -D -m0644 ap/hostapd-regdomain.conf /etc/systemd/system/hostapd-2g.service.d/regdomain.conf
|
|
install_rendered ap/11-van-ap-2g.network /etc/systemd/network/11-van-ap-2g.network
|
|
install -D -m0644 ap/van-ap-watchdog-2g.service /etc/systemd/system/van-ap-watchdog-2g.service
|
|
install -D -m0755 ap/van-ap-watchdog /usr/local/sbin/van-ap-watchdog
|
|
install -D -m0644 ap/van-ap-watchdog.service /etc/systemd/system/van-ap-watchdog.service
|
|
install_rendered ap/van-ap-dnsmasq.conf /etc/van-ap/dnsmasq.conf
|
|
install -D -m0644 ap/van-ap-dnsmasq.service /etc/systemd/system/van-ap-dnsmasq.service
|
|
install_rendered ap/10-van-ap.network /etc/systemd/network/10-van-ap.network
|
|
install -D -m0644 ap/20-van-br0.netdev /etc/systemd/network/20-van-br0.netdev
|
|
install_rendered ap/21-van-br0.network /etc/systemd/network/21-van-br0.network
|
|
# Named 05- (not 22-) so it sorts before Armbian's netplan-generated
|
|
# /run/systemd/network/10-netplan-all-eth-interfaces.network, which matches
|
|
# every e* port with DHCP and otherwise wins over this file (first match by
|
|
# filename), leaving the LAN port un-bridged.
|
|
install_rendered ap/22-van-lan.network /etc/systemd/network/05-van-lan.network
|
|
rm -f /etc/systemd/network/22-van-lan.network
|
|
if [ -n "${ONBOARD_LAN_IFACE:-}" ]; then
|
|
# 06- sorts before netplan's 10-* catch-all, like 05-van-lan above
|
|
install_rendered ap/23-van-lan-eth0.network /etc/systemd/network/06-van-lan-eth0.network
|
|
rm -f /etc/systemd/network/23-van-lan-eth0.network
|
|
else
|
|
rm -f /etc/systemd/network/23-van-lan-eth0.network /etc/systemd/network/06-van-lan-eth0.network
|
|
fi
|
|
install_rendered ap/van-ap-unmanaged.conf /etc/NetworkManager/conf.d/van-ap-unmanaged.conf
|
|
# Mask dracut's initramfs-generated catch-all (/run/systemd/network/
|
|
# zzzz-dracut-default.network, regenerated every boot): it matches every
|
|
# unconfigured link, so networkd co-managed the NM-owned WANs — a second
|
|
# DHCPv4 client on wlan0 and IPv6 that worked only by accident. NM owns WAN
|
|
# IPv6 now (see ap/50-van-wan.yaml). /etc overrides /run; /dev/null masks.
|
|
ln -sfn /dev/null /etc/systemd/network/zzzz-dracut-default.network
|
|
install_rendered ap/nftables.conf /etc/nftables.conf
|
|
install -D -m0644 ap/regdomain.service /etc/systemd/system/regdomain.service
|
|
install_rendered ap/van-br0-setup.service /etc/systemd/system/van-br0-setup.service
|
|
install -D -m0644 ap/80-regdomain.rules /etc/udev/rules.d/80-regdomain.rules
|
|
install -D -m0644 ap/rtl8188gu-modeswitch.conf /etc/usb-modeswitch.d/0bda:1a2b
|
|
install -D -m0644 ap/rtw89.conf /etc/modprobe.d/rtw89.conf
|
|
install -D -m0644 ap/99-van-router.conf /etc/sysctl.d/99-van-router.conf
|
|
|
|
echo "== dns =="
|
|
# Disable systemd-resolved DNS listener — dnsmasq handles DNS+DHCP on bridge.
|
|
# Even localhost-only listening blocks dnsmasq from binding to port 53.
|
|
install -D -m0644 ap/systemd-resolved-disable.conf /etc/systemd/system/systemd-resolved.service.d/disable.conf
|
|
# Fixed upstream resolvers (/etc/vanlink.conf's DNS_RESOLVERS), never a WAN's own
|
|
# DHCP/RA-provided DNS — see the files themselves for the full rationale.
|
|
# (NM's ipv4/ipv6.ignore-auto-dns can't be set as a config-file connection
|
|
# default — NM rejects it there — so 60-van-wan-dns enforces this directly
|
|
# against resolved instead, on every WAN connect/lease event.)
|
|
# .local (mDNS) is handled separately, scoped to br0 (see 21-van-br0.network
|
|
# above). ZeroTier-managed DNS (zt.wrede.pvt) is a separate, additive path.
|
|
install_rendered ap/99-van-router-dns.conf /etc/systemd/resolved.conf.d/99-van-router-dns.conf
|
|
install -D -m0755 failover/60-van-wan-dns /etc/NetworkManager/dispatcher.d/60-van-wan-dns
|
|
# ZeroTier-managed DNS for zt.wrede.pvt (see README's "ZeroTier managed DNS").
|
|
# allowDNS on the network + the search-domain drop-in are repo-tracked so a
|
|
# reimage doesn't need the manual `zerotier-cli set ... allowDNS=1` step
|
|
# remembered by hand; the manager binary itself is a hand-installed .deb
|
|
# (not in apt) — see https://github.com/zerotier/zerotier-systemd-manager/releases.
|
|
install -D -m0600 dns/zt-network.local.conf /var/lib/zerotier-one/networks.d/d3ecf5726d041b2a.local.conf
|
|
install -D -m0644 dns/zt-search.conf /etc/systemd/network/99-ztuga7c2kh.network.d/search.conf
|
|
dpkg -s zerotier-systemd-manager >/dev/null 2>&1 \
|
|
|| warn "zerotier-systemd-manager not installed — zt.wrede.pvt won't resolve. Install the arm64 .deb from https://github.com/zerotier/zerotier-systemd-manager/releases"
|
|
|
|
echo "== failover =="
|
|
install -D -m0755 failover/van-failover /usr/local/sbin/van-failover
|
|
install_rendered failover/config.json /etc/van-failover/config.json
|
|
install -D -m0644 failover/van-failover.service /etc/systemd/system/van-failover.service
|
|
install -D -m0755 failover/50-disable-eee /etc/NetworkManager/dispatcher.d/50-disable-eee
|
|
install -D -m0644 failover/99-van-arp.conf /etc/sysctl.d/99-van-arp.conf
|
|
# Backstop for wlan0's post-boot NM no-secrets wedge (see the script's docstring).
|
|
install -D -m0755 failover/van-wlan-watchdog /usr/local/sbin/van-wlan-watchdog
|
|
install_rendered failover/van-wlan-watchdog.service /etc/systemd/system/van-wlan-watchdog.service
|
|
|
|
echo "== cellular modem (GSM/LTE) =="
|
|
# NM's gsm.auto-config APN lookup needs this apt-only carrier database; without
|
|
# it even the right APN can't be auto-detected, and MVNOs (e.g. Koodo, which
|
|
# isn't listed under its own name — only under host network "Telus Mobility")
|
|
# often aren't in it anyway, so the modem's NM connection profile may still
|
|
# need an explicit gsm.apn set by hand regardless.
|
|
dpkg -s mobile-broadband-provider-info >/dev/null 2>&1 \
|
|
|| warn "mobile-broadband-provider-info missing (apt install mobile-broadband-provider-info) — GSM APN auto-config will fail"
|
|
# Backstop for the modem sometimes never enumerating at boot (see the
|
|
# script's docstring) — detection + Pushover alert only. No automated
|
|
# recovery: a hub power-cycle was proven not to fix this (only a genuine
|
|
# physical unplug/replug does), so the modem is now on the Pi's native USB
|
|
# port rather than through the hub. This just pages if it ever recurs.
|
|
install -D -m0755 failover/van-modem-watch /usr/local/sbin/van-modem-watch
|
|
install_rendered failover/van-modem-watch.service /etc/systemd/system/van-modem-watch.service
|
|
# SMS archive + Pushover relay: polls ModemManager for inbound SMS, appends
|
|
# each to /var/log/van-sms.jsonl, pages via Pushover, then deletes it from
|
|
# the modem's own flash storage (small, fills up silently otherwise). MMS
|
|
# can't be fetched here (see script docstring) — notification-only paging.
|
|
install -D -m0755 modem/van-sms-watch /usr/local/sbin/van-sms-watch
|
|
install -D -m0644 modem/van-sms-watch.service /etc/systemd/system/van-sms-watch.service
|
|
# CLI to send an SMS ad hoc (needs sudo — ModemManager's Messaging actions
|
|
# are PolicyKit-gated). Not a service, just a tool: sudo van-sms-send <number> <text>
|
|
install -D -m0755 modem/van-sms-send /usr/local/sbin/van-sms-send
|
|
|
|
if [ "$ENABLE_COCKPIT" = 1 ]; then
|
|
echo "== cockpit plugin =="
|
|
install -d /usr/share/cockpit/vanrouter
|
|
for f in cockpit/vanrouter/*; do
|
|
b=$(basename "$f")
|
|
if [ "$b" = "vanrouter.js" ]; then
|
|
install_rendered "$f" "/usr/share/cockpit/vanrouter/$b"
|
|
else
|
|
install -m0644 "$f" "/usr/share/cockpit/vanrouter/$b"
|
|
fi
|
|
done
|
|
# Bridge fd headroom (Python bridge frees spawn pipes only at GC; 1024 is too tight)
|
|
install -D -m0644 cockpit/cockpit-session-nofile.conf /etc/systemd/system/cockpit-session@.service.d/nofile.conf
|
|
fi
|
|
|
|
# The Starlink card queries the dish's gRPC API; grpcurl isn't packaged in apt.
|
|
command -v grpcurl >/dev/null 2>&1 \
|
|
|| warn "grpcurl missing (Starlink card will say so): install linux_arm64 binary from github.com/fullstorydev/grpcurl/releases"
|
|
|
|
echo "== router status (MQTT -> Home Assistant, replacing the Cockpit plugin above) =="
|
|
# Same status/actions as the cockpit plugin, published via MQTT discovery
|
|
# instead of a web UI of its own (Cockpit's login was unreliable and it was a
|
|
# resource hog on this Pi). No secrets in config.json (the local Mosquitto
|
|
# broker currently allows anonymous connections) so it's rendered + installed
|
|
# every deploy, same as failover/config.json.
|
|
install -D -m0755 router-status/van-router-mqtt /usr/local/sbin/van-router-mqtt
|
|
install_rendered router-status/config.json /etc/van-router-mqtt/config.json
|
|
install -D -m0644 router-status/van-router-mqtt.service /etc/systemd/system/van-router-mqtt.service
|
|
python3 -c 'import paho.mqtt' 2>/dev/null \
|
|
|| warn "python3-paho-mqtt missing (apt install python3-paho-mqtt) — van-router-mqtt won't start"
|
|
# MQTT broker must listen on all interfaces (not just localhost) for clients on br0
|
|
install -D -m0644 router-status/mosquitto-listener.conf /etc/mosquitto/conf.d/van-listener.conf
|
|
# Restart limit drop-ins: prevent infinite restart loops that trigger hardware watchdog
|
|
install -D -m0644 router-status/van-gps-owntracks-restart-limit.conf /etc/systemd/system/van-gps-owntracks.service.d/restart-limit.conf
|
|
|
|
echo "== gps (cellular modem GNSS -> gpsd) =="
|
|
if dpkg -s gpsd >/dev/null 2>&1; then
|
|
install -D -m0644 gps/77-modem-gps.rules /etc/udev/rules.d/77-modem-gps.rules
|
|
install -D -m0644 gps/gpsd.default /etc/default/gpsd
|
|
udevadm control --reload
|
|
else
|
|
warn "gpsd not installed (apt install gpsd gpsd-clients) — skipping GPS setup"
|
|
fi
|
|
# OwnTracks publisher: gpsd fix -> MQTT (broker + creds live only on the
|
|
# system, 0600 — same pattern as pushover.json).
|
|
install -D -m0755 gps/van-gps-owntracks /usr/local/sbin/van-gps-owntracks
|
|
install -D -m0644 gps/van-gps-owntracks.service /etc/systemd/system/van-gps-owntracks.service
|
|
if [ ! -f /etc/van-gps/config.json ]; then
|
|
install -D -m0600 gps/config.json.example /etc/van-gps/config.json
|
|
warn "seeded /etc/van-gps/config.json (EDIT IT: add MQTT username + password)"
|
|
fi
|
|
python3 -c 'import gps' 2>/dev/null \
|
|
|| warn "python3-gps missing (apt install python3-gps) — van-gps-owntracks won't start"
|
|
python3 -c 'import paho.mqtt' 2>/dev/null \
|
|
|| warn "python3-paho-mqtt missing (apt install python3-paho-mqtt) — van-gps-owntracks won't start"
|
|
|
|
if [ "$ENABLE_LI3" = 1 ]; then
|
|
echo "== li3 (RV house battery BMS -> MQTT/HA) =="
|
|
# NOT the laptop's own AC/battery monitor — that's power/van-battery (different
|
|
# hardware, different concern). This is the Lithionics Li3 12V LiFePO4 house
|
|
# battery, over its BLE HM-10 UART module (no pairing) -> Home Assistant MQTT
|
|
# discovery. Broker + creds live only on the system (0600, seeded from
|
|
# li3/config.json.example — same pattern as gps/pushover).
|
|
install -D -m0755 li3/van-li3-battery /usr/local/sbin/van-li3-battery
|
|
install -D -m0644 li3/van-li3-battery.service /etc/systemd/system/van-li3-battery.service
|
|
install -D -m0644 li3/van-li3-battery-restart-limit.conf /etc/systemd/system/van-li3-battery.service.d/restart-limit.conf
|
|
if [ ! -f /etc/van-li3/config.json ]; then
|
|
install -D -m0600 li3/config.json.example /etc/van-li3/config.json
|
|
warn "seeded /etc/van-li3/config.json (EDIT IT: add MQTT username + password)"
|
|
fi
|
|
python3 -c 'import bleak' 2>/dev/null \
|
|
|| warn "python3-bleak missing (apt install python3-bleak) — van-li3-battery won't start"
|
|
fi
|
|
|
|
echo "== thermal monitor =="
|
|
install -D -m0755 power/van-thermal /usr/local/sbin/van-thermal
|
|
install -D -m0644 power/thermal-config.json /etc/van-thermal/config.json
|
|
install -D -m0644 power/van-thermal.service /etc/systemd/system/van-thermal.service
|
|
# Pushover secrets live only on the system (0600), never in the repo. Path kept
|
|
# under /etc/van-battery/ for parity with wayback's van-thermal default.
|
|
if [ ! -f /etc/van-battery/pushover.json ]; then
|
|
install -D -m0600 power/pushover.json.example /etc/van-battery/pushover.json
|
|
warn "seeded /etc/van-battery/pushover.json (EDIT IT: add Pushover token + user)"
|
|
fi
|
|
|
|
if [ "$ENABLE_NVME_WATCH" = 1 ]; then
|
|
echo "== nvme watchdog =="
|
|
install -D -m0755 power/van-nvme-watch /usr/local/sbin/van-nvme-watch
|
|
install_rendered power/nvme-watch-config.json /etc/van-nvme-watch/config.json
|
|
install -D -m0644 power/van-nvme-watch.service /etc/systemd/system/van-nvme-watch.service
|
|
fi
|
|
|
|
echo "== home assistant =="
|
|
# Native HA (Podman Quadlet, replaced the ha_van VM). daemon-reload below
|
|
# regenerates homeassistant.service; started (not restarted) at the end so a
|
|
# deploy never bounces HA — after editing the .container, restart it manually.
|
|
if [ "$ENABLE_HA" = 1 ]; then
|
|
install -D -m0644 ha/homeassistant.container /etc/containers/systemd/homeassistant.container
|
|
install -d -m0755 /srv/homeassistant
|
|
# ESPHome dashboard (sibling container, same rationale as HA above — no
|
|
# Supervisor/add-on store here).
|
|
install -D -m0644 ha/esphome.container /etc/containers/systemd/esphome.container
|
|
install -d -m0755 /srv/esphome
|
|
fi
|
|
# Frigate NVR (sibling container, same rationale as HA/ESPHome above).
|
|
if [ "$ENABLE_FRIGATE" = 1 ]; then
|
|
install -D -m0644 ha/frigate.container /etc/containers/systemd/frigate.container
|
|
install -d -m0755 /srv/frigate/config /srv/frigate/storage
|
|
fi
|
|
|
|
echo "== hardware watchdog =="
|
|
install -D -m0644 power/10-vanlink-watchdog.conf /etc/systemd/system.conf.d/10-vanlink-watchdog.conf
|
|
|
|
if [ "$ENABLE_NM_WAN" = 1 ]; then
|
|
echo "== networkmanager WANs =="
|
|
# In place before the package starts NM: no auto-created "Wired connection" profiles.
|
|
install -D -m0644 ap/nm-no-auto-default.conf /etc/NetworkManager/conf.d/00-van-no-auto-default.conf
|
|
# Also in place before the package starts NM: NM keeps off the uplink port until --apply-network hands it
|
|
# over (WAN netplan missing), and the conf goes once the netplan matches; see nm_pending_action. NM picks
|
|
# up either change at the `nmcli general reload conf` below.
|
|
nm_np_state=$(nm_wan_state_netplan)
|
|
if [ "$nm_np_state" = missing ]; then
|
|
install_rendered ap/nm-uplink-pending.conf "$NM_PENDING_CONF"
|
|
elif [ "$nm_np_state" = matches ]; then
|
|
rm -f "$NM_PENDING_CONF"
|
|
fi
|
|
if ! nm_pkg_installed; then
|
|
# Installed only now: the package starts NM, which manages Wi-Fi/gsm devices by
|
|
# default, so van-ap-unmanaged.conf (AP radios, LAN ports) must already be in place.
|
|
apt-get update -qq || true
|
|
DEBIAN_FRONTEND=noninteractive apt-get install -y network-manager \
|
|
|| { echo "deploy: apt-get install network-manager failed" >&2; exit 1; }
|
|
fi
|
|
systemctl enable --now NetworkManager ModemManager >/dev/null 2>&1 \
|
|
|| warn "failed to enable/start NetworkManager/ModemManager (check: systemctl status NetworkManager ModemManager)"
|
|
nmcli general reload conf 2>/dev/null || true
|
|
for nm_if in "$WIFI_5G_IFACE" "$WIFI_2G_IFACE" "$LAN_IFACE" ${ONBOARD_LAN_IFACE:-}; do
|
|
[ -e "/sys/class/net/$nm_if" ] || continue
|
|
nm_state=$(nmcli -t -f DEVICE,STATE device 2>/dev/null | awk -F: -v d="$nm_if" '$1 == d { print $2 }') || true
|
|
[ "$nm_state" = unmanaged ] \
|
|
|| warn "NetworkManager manages $nm_if (state: ${nm_state:-unknown}) — AP/LAN ports must be unmanaged (see ap/van-ap-unmanaged.conf)"
|
|
done
|
|
if [ -n "${CELLULAR_APN:-}" ]; then
|
|
nm_keyfile="/etc/NetworkManager/system-connections/${CELLULAR_CONN_NAME}.nmconnection"
|
|
if cellular_profile_exists; then
|
|
echo " cellular connection ${CELLULAR_CONN_NAME} exists — left unchanged"
|
|
elif [ -z "${CELLULAR_UUID:-}" ]; then
|
|
warn "CELLULAR_UUID is empty — not creating the cellular keyfile $nm_keyfile"
|
|
else
|
|
install_rendered ap/cellular.nmconnection "$nm_keyfile" 0600
|
|
nmcli connection reload 2>/dev/null || true
|
|
echo " created cellular connection ${CELLULAR_CONN_NAME} (apn ${CELLULAR_APN}) — no modem needed"
|
|
fi
|
|
fi
|
|
if [ "$nm_np_state" != matches ]; then
|
|
warn "WAN netplan is $nm_np_state (not provisioned/up to date): run ./deploy.sh --apply-network (backs up /etc/netplan and rolls back automatically if the uplink does not come back)"
|
|
fi
|
|
fi
|
|
|
|
echo "== apply =="
|
|
sysctl --system >/dev/null
|
|
systemctl daemon-reload
|
|
# Re-exec PID1 so the system.conf.d watchdog drop-in takes effect (daemon-reload
|
|
# alone does NOT re-arm RuntimeWatchdogSec). Safe online.
|
|
systemctl daemon-reexec
|
|
# Safe online: picks up 99-van-router-dns.conf immediately. NM's
|
|
# ignore-auto-dns only takes effect on a connection's next activation though —
|
|
# an already-up WAN keeps its currently-applied DNS until it reconnects (or
|
|
# reboot), deliberately not forced here (reconnecting a WAN flaps it).
|
|
systemctl restart systemd-resolved
|
|
systemctl restart mosquitto
|
|
# networkd here owns only the AP radios + bridge + wired LAN port (no real uplink);
|
|
# its wait-online would just stall network-online.target. NM-wait-online covers WANs.
|
|
systemctl mask systemd-networkd-wait-online.service >/dev/null 2>&1 || true
|
|
systemctl unmask hostapd >/dev/null 2>&1 || true
|
|
# Disable system dnsmasq.service to avoid port 53 conflicts — van-ap-dnsmasq owns AP DHCP
|
|
systemctl disable dnsmasq.service >/dev/null 2>&1 || true
|
|
set_units
|
|
systemctl enable "${ENABLE_UNITS[@]}" >/dev/null 2>&1 || true
|
|
# bluetooth: host BlueZ serves the onboard hci0 to the HA container over D-Bus
|
|
systemctl enable --now bluetooth >/dev/null 2>&1 || true
|
|
if [ "$ENABLE_HA" = 1 ]; then
|
|
systemctl start homeassistant || warn "homeassistant failed to start (podman/quadlet — check journalctl -u homeassistant)"
|
|
systemctl start esphome || warn "esphome failed to start (podman/quadlet — check journalctl -u esphome)"
|
|
fi
|
|
if [ "$ENABLE_FRIGATE" = 1 ]; then
|
|
systemctl start frigate || warn "frigate failed to start (podman/quadlet — check journalctl -u frigate)"
|
|
fi
|
|
systemctl restart van-thermal
|
|
if [ "$ENABLE_NVME_WATCH" = 1 ]; then
|
|
systemctl restart van-nvme-watch
|
|
fi
|
|
systemctl restart van-sms-watch
|
|
systemctl restart van-gps-owntracks
|
|
if [ "$ENABLE_LI3" = 1 ]; then
|
|
systemctl restart van-li3-battery
|
|
fi
|
|
systemctl restart van-router-mqtt
|
|
# Pick up unmanaged-devices changes so NM releases/keeps the right interfaces.
|
|
nmcli general reload 2>/dev/null || systemctl reload NetworkManager 2>/dev/null || true
|
|
# restart in dependency order: bridge + members first, then hostapd enslaves the
|
|
# radios, then dnsmasq binds br0, then NAT/failover
|
|
systemctl restart systemd-networkd
|
|
for u in van-ap-dnsmasq nftables van-failover van-wlan-watchdog; do
|
|
systemctl restart "$u" || warn "$u failed to restart (journalctl -xeu $u)"
|
|
done
|
|
# An AP radio may be absent; the start then fails but Restart=always keeps
|
|
# retrying and claims it the moment it enumerates (post_check reports absent radios).
|
|
systemctl restart hostapd hostapd-2g || true
|
|
# AP watchdogs last, after hostapd is back up (they only ever restart a wedged hostapd)
|
|
systemctl restart van-ap-watchdog van-ap-watchdog-2g
|
|
networkctl reload 2>/dev/null || true
|
|
|
|
post_check
|
|
write_warnings
|
|
|
|
if [ ${#WARNINGS[@]} -gt 0 ]; then
|
|
echo
|
|
echo "== warnings =="
|
|
for w in "${WARNINGS[@]}"; do echo " -> $w"; done
|
|
fi
|
|
|
|
echo
|
|
echo "Deployed host $(hostname -s) with $(readlink -f "$VANLINK_CONF")."
|
|
echo "Verify further:"
|
|
echo " cat /run/van-failover/state.json"
|
|
echo " cat /run/van-thermal/state.json"
|
|
echo " journalctl -u van-router-mqtt -n 20"
|
|
echo " journalctl -u van-sms-watch -n 20"
|
|
if [ "$ENABLE_NVME_WATCH" = 1 ]; then
|
|
echo " cat /run/van-nvme-watch/state.json"
|
|
fi
|
|
if [ "$ENABLE_LI3" = 1 ]; then
|
|
echo " journalctl -u van-li3-battery -n 20"
|
|
fi
|
|
echo " ./deploy.sh --post-check # re-run the checks above"
|