andreasandClaude Haiku 4.5
565e8f31ab
Problem: R5C spontaneously rebooted due to hardware watchdog timeout Cause 1: van-gps-owntracks in infinite restart loop (MQTT connect failed) Cause 2: mosquitto only listening on localhost, so clients couldn't connect Solution: - Add restart limits to van-gps-owntracks and van-li3-battery services (max 3 restarts per 5 minutes prevents infinite restart loops) - Configure mosquitto to listen on all interfaces (0.0.0.0:1883) - Deploy mosquitto listener config via deploy.sh - Restart mosquitto during deploy to apply config changes This prevents the system from hitting the 11-second hardware watchdog timeout when services crash and systemd auto-restarts them indefinitely. Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
36 lines
1.3 KiB
Plaintext
36 lines
1.3 KiB
Plaintext
# ESPHome dashboard as a Podman Quadlet, same pattern as homeassistant.container
|
|
# (this isn't Home Assistant Supervised, so there's no add-on store — a sibling
|
|
# container is the equivalent). Installed by deploy.sh to /etc/containers/systemd/;
|
|
# systemd generates esphome.service from it.
|
|
#
|
|
# Host networking: the dashboard binds :6052 directly (http://10.42.0.1:6052),
|
|
# and ESPHome's mDNS-based OTA discovery/flashing of already-provisioned nodes
|
|
# needs to see the LAN as the host does — a bridged network would need explicit
|
|
# port/mDNS forwarding for the same result.
|
|
[Unit]
|
|
Description=ESPHome dashboard (Podman container)
|
|
Wants=network-online.target
|
|
After=network-online.target
|
|
|
|
[Container]
|
|
Image=ghcr.io/esphome/esphome:stable
|
|
ContainerName=esphome
|
|
Network=host
|
|
Volume=/srv/esphome:/config
|
|
Environment=TZ=America/Toronto
|
|
# Initial flash of a new device needs USB serial access; OTA re-flashes of an
|
|
# already-provisioned node don't. Uncomment and set the real path to flash
|
|
# over USB (find it with `ls /dev/ttyUSB* /dev/ttyACM*` after plugging the
|
|
# device in):
|
|
#Volume=/dev/ttyUSB0:/dev/ttyUSB0
|
|
#AddCapability=SYS_ADMIN
|
|
|
|
[Service]
|
|
Restart=always
|
|
# First start pulls the image; PlatformIO also downloads toolchains on a
|
|
# node's first compile — both want a working WAN, not just a fast one.
|
|
TimeoutStartSec=900
|
|
|
|
[Install]
|
|
WantedBy=multi-user.target
|