Andreas WredeandClaude Sonnet 5
5d88e1b30c
- deploy.conf templates interface names/USB IDs (@TOKEN@ substitution) across ap/* configs so a dongle swap only needs deploy.conf edited, not the repo configs themselves; drops ap/rtw88.conf (old 2.4GHz dongle retired for the DWA-171, which needs no such power-save override). - failover/van-wlan-watchdog: recovers wlan0 from NM's post-boot no-secrets wedge (a boot-time supplicant race, not a real credential failure). - deploy.sh: warn() collects dependency/config warnings (missing python3-gps, python3-paho-mqtt, mobile-broadband-provider-info, grpcurl, gpsd; netplan drift; unedited example configs) into /var/lib/vanlink/deploy-warnings.json, rendered as an amber Cockpit card so they're visible without reading deploy output. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
27 lines
1.1 KiB
Plaintext
27 lines
1.1 KiB
Plaintext
# deploy.conf — hardware-instance identifiers for this Pi's vanlink deployment.
|
|
#
|
|
# These are the values that change when a USB Wi-Fi dongle, LAN adapter, or
|
|
# modem gets physically swapped (MAC-derived interface names are stable per
|
|
# physical device, but change when the device changes). Edit here and run
|
|
# `sudo ./deploy.sh` — it substitutes @TOKEN@ placeholders in the repo's
|
|
# config templates with these values before installing them.
|
|
#
|
|
# Find a new device's interface name after plugging it in: `iw dev` (wifi) or
|
|
# `ip -br link` (wired). USB vendor ID: `lsusb`.
|
|
# Preview a rendered file without deploying: `sudo ./deploy.sh render <file>`
|
|
|
|
# 5GHz AP radio (currently: Realtek RTL8852BU, driver rtw89_8852bu)
|
|
WIFI_5G_IFACE=wlxc83a35a4ee55
|
|
|
|
# 2.4GHz AP radio (currently: D-Link DWA-171, RTL8821CU, driver rtw88_8821cu)
|
|
WIFI_2G_IFACE=wlx3c3332002066
|
|
|
|
# Wired LAN port, USB-attached gigabit adapter (RTL8153-family)
|
|
LAN_USB_IFACE=enx00e04c331140
|
|
|
|
# Starlink dish uplink, USB-attached gigabit adapter (RTL8153-family)
|
|
STARLINK_IFACE=enxd8ec5eeb3512
|
|
|
|
# Cellular modem USB vendor ID (Quectel EC25-AF)
|
|
MODEM_USB_VENDOR=2c7c
|