Andreas WredeandClaude Fable 5
a36b64c7c4
With wifi + Starlink + cellular as uplinks, the onboard GbE earns its keep as a wired LAN port instead of the metric-150 ethernet WAN: eth0 leaves netplan/NM (added to van-ap-unmanaged.conf) and joins br0 via networkd (23-van-lan-eth0.network), so wired clients get 10.42.0.x DHCP/DNS and NAT exactly like Wi-Fi clients. The eth WAN is gone from van-failover's config. Cutover notes: delete the old netplan-eth0 / stray eth0 NM profiles, then nmcli general reload + networkctl reload/reconfigure eth0. NEVER cable this port (or the USB LAN dongle) back into an upstream LAN — dnsmasq on br0 would serve rogue DHCP there; STP stays off, so don't cable both wired LAN ports to the same switch either. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
6 lines
329 B
Plaintext
6 lines
329 B
Plaintext
[keyfile]
|
|
# The AP wlans (5GHz + 2.4GHz) and the wired LAN ports (USB dongle + onboard
|
|
# eth0) are all owned by systemd-networkd/hostapd (bridged into br0), so
|
|
# NetworkManager must not touch them.
|
|
unmanaged-devices=interface-name:wlxc83a35a4ee55;interface-name:wlxd8ec5e2faa8c;interface-name:enx00e04c331140;interface-name:eth0
|