Completes the van-modem-usb-kick -> van-modem-watch swap from the previous commit: deploy.sh was still installing/enabling the old unit. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
136 lines
4.8 KiB
Python
Executable File
136 lines
4.8 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
"""van-modem-watch — pages if the EC25 modem never enumerates at boot.
|
|
|
|
Detection only, deliberately no recovery attempt. On 2026-08-04 the modem
|
|
(then on a shared powered USB hub) sometimes failed to enumerate on a cold
|
|
boot. Investigation ruled out a boot-timing race and a bad cable/port: a
|
|
genuine hub-commanded VBUS power-cycle (confirmed via kernel disconnect/
|
|
reconnect events, held off for a full 10s) did not recover it, even with the
|
|
rest of the system already up and stable — only a real physical unplug/
|
|
replug of the connector ever did. That means no software action from this
|
|
host can fix it once it happens; the modem was moved off the hub onto the
|
|
Pi's native USB port as the actual fix (a direct port doesn't reproduce the
|
|
failure). This just watches for a recurrence and pages, since if it comes
|
|
back the only real fix is someone physically reseating the connector.
|
|
|
|
Pushover credentials shared with van-battery/van-thermal/van-nvme-watch
|
|
(/etc/van-battery/pushover.json, 0600). Publishes /run/van-modem-watch/
|
|
state.json (same convention as the other watchdogs). Stdlib only.
|
|
|
|
Usage: van-modem-watch [modem-usb-vendor]
|
|
Defaults to 2c7c (Quectel) — see deploy.conf.
|
|
"""
|
|
|
|
import json
|
|
import socket
|
|
import sys
|
|
import time
|
|
import urllib.parse
|
|
import urllib.request
|
|
from datetime import datetime, timezone
|
|
from pathlib import Path
|
|
|
|
MODEM_VENDOR = sys.argv[1] if len(sys.argv) > 1 else "2c7c"
|
|
INTERVAL = 20 # seconds between checks
|
|
BUDGET_S = 6 * INTERVAL # ~2 minutes of retries after boot, then give up quietly
|
|
USB_DEVICES = Path("/sys/bus/usb/devices")
|
|
STATE_DIR = Path("/run/van-modem-watch")
|
|
STATE_PATH = STATE_DIR / "state.json"
|
|
CREDENTIALS_PATH = Path("/etc/van-battery/pushover.json")
|
|
HOST = socket.gethostname()
|
|
PLACEHOLDERS = {"", "REPLACE_ME", "your-token-here", "your-user-key-here"}
|
|
|
|
|
|
def log(msg, level="info"):
|
|
# systemd journal severity prefixes (sd-daemon), same convention as van-ap-watchdog.
|
|
pri = {"info": "<6>", "warn": "<4>", "crit": "<2>"}.get(level, "<6>")
|
|
print(pri + msg, flush=True)
|
|
|
|
|
|
def modem_present(vendor):
|
|
for f in USB_DEVICES.glob("*/idVendor"):
|
|
try:
|
|
if f.read_text().strip() == vendor:
|
|
return True
|
|
except OSError:
|
|
continue
|
|
return False
|
|
|
|
|
|
def load_creds():
|
|
try:
|
|
c = json.loads(CREDENTIALS_PATH.read_text())
|
|
token, user = str(c.get("token", "")).strip(), str(c.get("user", "")).strip()
|
|
if token in PLACEHOLDERS or user in PLACEHOLDERS:
|
|
return None
|
|
return token, user
|
|
except FileNotFoundError:
|
|
return None
|
|
except Exception as e:
|
|
log(f"credentials {CREDENTIALS_PATH} unreadable ({e})", "warn")
|
|
return None
|
|
|
|
|
|
def pushover(title, message, attempts=3, retry_delay=15):
|
|
creds = load_creds()
|
|
if not creds:
|
|
log(f"pushover skipped (no credentials): {title} — {message}", "warn")
|
|
return False
|
|
token, user = creds
|
|
data = urllib.parse.urlencode({
|
|
"token": token, "user": user, "title": title, "message": message,
|
|
}).encode()
|
|
req = urllib.request.Request("https://api.pushover.net/1/messages.json", data=data)
|
|
for attempt in range(1, attempts + 1):
|
|
try:
|
|
with urllib.request.urlopen(req, timeout=10) as resp:
|
|
ok = resp.status == 200
|
|
if not ok:
|
|
log(f"pushover HTTP {resp.status}", "warn")
|
|
return ok
|
|
except Exception as e:
|
|
last = attempt == attempts
|
|
log(f"pushover send failed ({attempt}/{attempts}): {e}", "warn")
|
|
if not last:
|
|
time.sleep(retry_delay)
|
|
return False
|
|
|
|
|
|
def write_state(payload):
|
|
STATE_DIR.mkdir(parents=True, exist_ok=True)
|
|
tmp = STATE_PATH.with_suffix(".tmp")
|
|
tmp.write_text(json.dumps(payload))
|
|
tmp.replace(STATE_PATH)
|
|
|
|
|
|
def main():
|
|
log(f"van-modem-watch up: watching for USB vendor {MODEM_VENDOR} for up to "
|
|
f"{BUDGET_S}s after boot")
|
|
elapsed = 0
|
|
while elapsed < BUDGET_S:
|
|
if modem_present(MODEM_VENDOR):
|
|
log("modem present — exiting")
|
|
write_state({
|
|
"updated": datetime.now(timezone.utc).isoformat(timespec="seconds"),
|
|
"present": True,
|
|
})
|
|
return
|
|
time.sleep(INTERVAL)
|
|
elapsed += INTERVAL
|
|
|
|
message = (f"modem (USB vendor {MODEM_VENDOR}) not seen {BUDGET_S}s after boot — "
|
|
f"needs a physical unplug/replug, no software fix works for this")
|
|
log(message, "crit")
|
|
write_state({
|
|
"updated": datetime.now(timezone.utc).isoformat(timespec="seconds"),
|
|
"present": False,
|
|
})
|
|
pushover(f"🚨 {HOST}: cellular modem absent after boot", message)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
try:
|
|
main()
|
|
except KeyboardInterrupt:
|
|
sys.exit(0)
|