Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KqhjP7nud5gdBg25zCiRk9
36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
# hosts/van.conf — FriendlyElec NanoPi R5C, hostname "van" (Armbian).
|
|
# /etc/vanlink.conf -> this file. See hosts/vanlink.conf.example for the variable list.
|
|
|
|
WIFI_5G_IFACE=wlp1s0 # MediaTek MT7925E (PCIe); 2.4GHz AP is the separate USB dongle below
|
|
WIFI_2G_IFACE=wlx3c3332002066 # D-Link USB dongle
|
|
LAN_IFACE=enP1p17s0
|
|
STARLINK_IFACE=enP2p33s0
|
|
WIFI_WAN_IFACE=wlan0 # not present on this host (kept for the failover config)
|
|
ONBOARD_LAN_IFACE=
|
|
|
|
GATEWAY_IP="10.42.1.1"
|
|
GATEWAY_PREFIX="24"
|
|
GATEWAY_NETWORK="10.42.1.0/24"
|
|
DHCP_RANGE_START="10.42.1.10"
|
|
DHCP_RANGE_END="10.42.1.254"
|
|
DNS_RESOLVERS="1.1.1.1 8.8.8.8"
|
|
|
|
MODEM_USB_VENDOR=2c7c
|
|
|
|
AP_SSID_5G=VanLink2
|
|
AP_SSID_2G=VanLink2-2G
|
|
# MT7925E: no 80MHz width lines, no ieee80211h
|
|
AP_5G_RADIO='ht_capab=[HT20][SHORT-GI-20][HT40+][HT40-]\nvht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][SU-BEAMFORMEE]\nhe_su_beamformee=1\nhe_mu_edca_qos_info_param_count=0'
|
|
NVME_DEVICE=
|
|
NVME_FS_DEVICE=
|
|
|
|
USB_BACKUP_ROOT_PART=
|
|
USB_BACKUP_MOUNT=
|
|
SD_BACKUP_UUID=39118305-4927-47a4-acc7-ba022f37af22
|
|
|
|
ENABLE_COCKPIT=0
|
|
ENABLE_LI3=1
|
|
ENABLE_NVME_WATCH=0 # no NVMe on this board
|
|
ENABLE_HA=1
|
|
ENABLE_FRIGATE=1
|