andreasandClaude Haiku 4.5
565e8f31ab
Problem: R5C spontaneously rebooted due to hardware watchdog timeout Cause 1: van-gps-owntracks in infinite restart loop (MQTT connect failed) Cause 2: mosquitto only listening on localhost, so clients couldn't connect Solution: - Add restart limits to van-gps-owntracks and van-li3-battery services (max 3 restarts per 5 minutes prevents infinite restart loops) - Configure mosquitto to listen on all interfaces (0.0.0.0:1883) - Deploy mosquitto listener config via deploy.sh - Restart mosquitto during deploy to apply config changes This prevents the system from hitting the 11-second hardware watchdog timeout when services crash and systemd auto-restarts them indefinitely. Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
32 lines
981 B
Plaintext
32 lines
981 B
Plaintext
interface=@WIFI_5G_IFACE@
|
|
# Put the AP into br0 so Wi-Fi and the wired LAN port share one 10.42.0.0/24 segment.
|
|
# hostapd adds the wlan to the bridge after setting AP mode; the bridge itself + its
|
|
# wired member + the gateway IP are defined under /etc/systemd/network (2x-van-br0/lan).
|
|
bridge=br0
|
|
# Control socket so van-ap-watchdog (and hostapd_cli) can read the AP's real state
|
|
# (state=ENABLED means it's actually beaconing) — used to detect a wedged radio that
|
|
# stays "running" but stops serving after a USB glitch.
|
|
ctrl_interface=/var/run/hostapd
|
|
driver=nl80211
|
|
ssid=VanLink2
|
|
country_code=CA
|
|
ieee80211d=1
|
|
ieee80211h=0
|
|
hw_mode=a
|
|
channel=149
|
|
wmm_enabled=1
|
|
ieee80211n=1
|
|
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40]
|
|
ieee80211ac=1
|
|
vht_oper_chwidth=1
|
|
vht_oper_centr_freq_seg0_idx=155
|
|
vht_capab=[RXLDPC][SHORT-GI-80][SU-BEAMFORMEE]
|
|
ieee80211ax=1
|
|
he_oper_chwidth=1
|
|
he_oper_centr_freq_seg0_idx=155
|
|
auth_algs=1
|
|
wpa=2
|
|
wpa_passphrase=1foot11foot11
|
|
wpa_key_mgmt=WPA-PSK
|
|
rsn_pairwise=CCMP
|